Hi there - I have a question about the CM. The user manual for the software states that...
\"One important limitation for parts modified in the Part Editor is that the size of the part cannot be changed after it has been modified. This means that you cannot perform any operation on the cabinet that would result in the size of the modified part changing without abandoning the modifications made in the Part Editor\"
But it seems that the constraint manager corrects this limitation. Is this just a legacy issue with the manual? Or am I missing something? Thanks for any feedback.
Constraint Manager Question - New User
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- New Member
- Posts: 23
- Joined: Tue, Sep 18 2007, 5:17PM
- Location: Toronto, Canada
- Contact:
-
- eCabinets Beta Tester
- Posts: 1119
- Joined: Tue, May 10 2005, 9:36PM
- Company Name: Corlane Custom Cabinetry LLC
- Country: UNITED STATES
- Location: Carnesville, GA
- Contact:
That limitation no longer exists with the part editor Philip, the docs just need to be updated. Modified parts will stay that way, even if you don't use the CM.
http://www.corlanecabinetry.com
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
-
- New Member
- Posts: 23
- Joined: Tue, Sep 18 2007, 5:17PM
- Location: Toronto, Canada
- Contact: