RAW SEGMENT
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- eCabinets Beta Tester
- Posts: 1740
- Joined: Tue, May 17 2005, 8:33PM
- Company Name: Timeless Cabinetry and Mantles
- Location: South East
RAW SEGMENT
Here is a corner cabinet and I can't get the right stile to 45 back into the cabinet.
The left side is how I want the cabinet, but the right side just won't cooperate.
The left side is how I want the cabinet, but the right side just won't cooperate.
- Attachments
-
- Corner.jpg (10.62 KiB) Viewed 7870 times
-
- Corner.hsf
- (752.02 KiB) Downloaded 277 times
Intel Core i7-5820K (6-Cores, 3.3GHz, 15MB Cache)
32Gigs DDR4
NVIDIA GeForce GTX 960 4GB
SSD 840 256Gig, 2TB, 3TB, Samsung (2TB)
Corsair RM650
32Gigs DDR4
NVIDIA GeForce GTX 960 4GB
SSD 840 256Gig, 2TB, 3TB, Samsung (2TB)
Corsair RM650
-
- eCabinets Beta Tester
- Posts: 1740
- Joined: Tue, May 17 2005, 8:33PM
- Company Name: Timeless Cabinetry and Mantles
- Location: South East
correct Dan, I want a profile on the right just like the left.
For some reason I get a error. \"Error creating Raw segment\" when I attempt to profile the right stile with a 45
For some reason I get a error. \"Error creating Raw segment\" when I attempt to profile the right stile with a 45
Intel Core i7-5820K (6-Cores, 3.3GHz, 15MB Cache)
32Gigs DDR4
NVIDIA GeForce GTX 960 4GB
SSD 840 256Gig, 2TB, 3TB, Samsung (2TB)
Corsair RM650
32Gigs DDR4
NVIDIA GeForce GTX 960 4GB
SSD 840 256Gig, 2TB, 3TB, Samsung (2TB)
Corsair RM650
-
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Re:
Well, that didn't help. I also noticed that the left end was mitered but not the right end. I mitered it and still get the same result.DanEpps wrote:...You might try removing the face frame and putting it back.
-
- eCabinets Beta Tester
- Posts: 414
- Joined: Tue, May 10 2005, 9:58AM
- Location: Bellingham, Washington
-
- Senior Member
- Posts: 199
- Joined: Sun, Jul 31 2005, 9:45AM
- Location: Madison Ga.
I had the same problem about a year ago trying to bevel the edge on a right stile of a corner cabinet. The left stile was no problem, but I couldn't make the cut on the right stile. I brought it up on the forum, but I guess it never got noticed by the programers. Obviously, still not working...
Mike
Mike
It's what you do, with what you got !
-
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Alright Mike Rice, you got me back to hacking away at this (you know how it is).
I found the workaround to profiling the right stile on a corner cabinet! You have to profile from the opposite edge (left instead of right) and offset right the (width - thickness) of the board.
In this example I used 3/4 x 2 board stock. I profiled the LEFT edge with an \"upside down\" tool and offset it right 1 1/4\".
My brain hurts...can I take the rest of the day off now?
I found the workaround to profiling the right stile on a corner cabinet! You have to profile from the opposite edge (left instead of right) and offset right the (width - thickness) of the board.
In this example I used 3/4 x 2 board stock. I profiled the LEFT edge with an \"upside down\" tool and offset it right 1 1/4\".
My brain hurts...can I take the rest of the day off now?
- Attachments
-
- Got it.jpg (78.24 KiB) Viewed 7760 times
-
- Senior Member
- Posts: 199
- Joined: Sun, Jul 31 2005, 9:45AM
- Location: Madison Ga.
-
- eCabinets Beta Tester
- Posts: 1740
- Joined: Tue, May 17 2005, 8:33PM
- Company Name: Timeless Cabinetry and Mantles
- Location: South East