Custom Layout glitch
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Senior Member
- Posts: 170
- Joined: Sat, Oct 22 2005, 10:59AM
- Location: Spartanburg, SC
- Contact:
Custom Layout glitch
When I am loading a cabinet in Custom Layout and choose to resize the width of the cabinet, the cabinet height decreases. Is anyone else having this problem??
- Attachments
-
- resize.jpg (78.19 KiB) Viewed 8902 times
-
- Senior Member
- Posts: 193
- Joined: Tue, Jan 17 2006, 1:27AM
- Location: Pretoria, South Africa
Dan,
If you have a closer look at the picture, you will see that the cabinet(s) on the end have their grain oriented from top to bottom and not left to right. I think that totally confused the tessalation generator in the quantum drive motor.
Ben,
Sorry for that one...
If you have a closer look at the picture, you will see that the cabinet(s) on the end have their grain oriented from top to bottom and not left to right. I think that totally confused the tessalation generator in the quantum drive motor.
Ben,
Sorry for that one...
Paul Ellis
"If it works, don't fix it"
"If it works, don't fix it"
-
- Senior Member
- Posts: 170
- Joined: Sat, Oct 22 2005, 10:59AM
- Location: Spartanburg, SC
- Contact:
This has happened to me with at least two different cabinet designs, but it doesn't do it with every cabinet design. I am attaching the file for the cabinet that is shown in the picture in my previous post. This cabinet shrinks wheather I increase or decrease it's width.
- Attachments
-
- Catalog 36in Bev .72.hsf
- (258.02 KiB) Downloaded 290 times
-
- eCabinets Beta Tester
- Posts: 1740
- Joined: Tue, May 17 2005, 8:33PM
- Company Name: Timeless Cabinetry and Mantles
- Location: South East
-
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
My question is...why can everyone but me reproduce the problem?
Here is what I'm doing:
1. Create a wall
2. Insert cabinet \"as is\"
3. Insert same cabinet but this time, click the \"Change Size\" button in the \"Load Item\" dialog.
4. Set the width to 48\" and leave all other dimensions as is.
Are these the exact steps the rest of you are using?
Here is what I'm doing:
1. Create a wall
2. Insert cabinet \"as is\"
3. Insert same cabinet but this time, click the \"Change Size\" button in the \"Load Item\" dialog.
4. Set the width to 48\" and leave all other dimensions as is.
Are these the exact steps the rest of you are using?
-
- Thermwood Team
- Posts: 857
- Joined: Tue, May 17 2005, 12:47PM
- Company Name: Thermwood
- Country: UNITED STATES
- Location: Thermwood
This is the result of saved cabinet in a older version (happened with cabs with detached toes). The cabinet height was saved wrong. When you click on the cabinet in Load dialog, you see the height was 26.5\". However when you load the cabinet in cabe ditor, you see the height is 32\". Resave the cabinet in cabeditor and it will fix you change size problem in the Custom Layout Editor.
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900