Problems copying cabinet part

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
TonyGiunta
Senior Member
Posts: 132
Joined: Tue, Jan 16 2007, 8:03PM
Company Name: ToSa Design
Country: UNITED STATES
Location: Sheffield, MA

Problems copying cabinet part

Post by TonyGiunta »

I am trying to copy a back panel to a standard cabinet that has some fixed shelves full dado'ed into it and I want to copy the back panel and paste into the main editor. I highlight the part, hit Ctrl-C, then Ctrl-V, nothing happens. Can a part like this be copied and pasted? Am I doing something incorrect? Thanks

Tony
Mike Seisser
eCabinets Beta Tester
Posts: 544
Joined: Wed, Feb 22 2006, 11:40PM
Company Name: NCB Inc.
Country: UNITED STATES

Post by Mike Seisser »

Tony,

I don't think cab parts can be copied/pasted that way, but there's a way around it. Load a duplicate copy of the cabinet, delete/turn off all parts/face frames that you don't need, leaving the one that you do. Or create it using a display panel at the appropriate size.

Mike
Proper Planning Prevents Poor Production.
TonyGiunta
Senior Member
Posts: 132
Joined: Tue, Jan 16 2007, 8:03PM
Company Name: ToSa Design
Country: UNITED STATES
Location: Sheffield, MA

Post by TonyGiunta »

Mike,

I did try bringing in a duplicate cab then deleting the parts, but it would remove the dado joints for the fixed shelves when those were deleted. I guess i will have to go the DP route. Trying to save some time. Thanks for your help
Post Reply