How do you make arched cabinets similar to the entertainment center Damon made in the post on asthetics
Greg
arched cabinets
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Junior Member
- Posts: 69
- Joined: Sat, Nov 18 2006, 5:07PM
- Location: Memphis Tn
arched cabinets
Successful people do the things others won't
-
- eCabinets Beta Tester
- Posts: 923
- Joined: Wed, Apr 05 2006, 5:50PM
- Location: Marion, Ar.
- Contact:
Re: arched cabinets
Are you talking about something like this? This is a little more basic, but still arched. I had to do it fast and furious, so no bells or whistles.
- Attachments
-
- dr. dilal3 (2).jpg (102.62 KiB) Viewed 4828 times
Damon Nabors
-
- eCabinets Beta Tester
- Posts: 923
- Joined: Wed, Apr 05 2006, 5:50PM
- Location: Marion, Ar.
- Contact:
Re: arched cabinets
Greg, here is something a little simpler. Take a standard upper cabinet. Go to construction settings and then go to face frame. Go to page two. Set your left and right styles to any size you like, maybe 3", then set your upper rail to 15". click ok.
Now, size your cabinet to say, 30 x 12 x 60, then click the upper rail and take it to the parts editor and cut the arch out of the part and return. You should end up with something that would look like this:
Now, size your cabinet to say, 30 x 12 x 60, then click the upper rail and take it to the parts editor and cut the arch out of the part and return. You should end up with something that would look like this:
- Attachments
-
- arched display.jpg (28.1 KiB) Viewed 4788 times
Damon Nabors
-
- Junior Member
- Posts: 45
- Joined: Fri, May 18 2007, 9:40AM
Re: arched cabinets
Damon Nabors wrote:Greg, here is something a little simpler. Take a standard upper cabinet. Go to construction settings and then go to face frame. Go to page two. Set your left and right styles to any size you like, maybe 3", then set your upper rail to 15". click ok.
Now, size your cabinet to say, 30 x 12 x 60, then click the upper rail and take it to the parts editor and cut the arch out of the part and return. You should end up with something that would look like this:
Hi Damon,
Where are you getting the crown molding from? The vendors that come w/ the software seem to have a limited quantity. Or are you creating it yourself.
-
- eCabinets Beta Tester
- Posts: 923
- Joined: Wed, Apr 05 2006, 5:50PM
- Location: Marion, Ar.
- Contact:
Re: arched cabinets
Patrick, that crown is from the Thermwood list.
Product ID: RP-FR-BEA0003 Description: Brittany Entertainment Armoire Top Molding
Product ID: RP-FR-BEA0003 Description: Brittany Entertainment Armoire Top Molding
Damon Nabors
-
- Junior Member
- Posts: 45
- Joined: Fri, May 18 2007, 9:40AM
Re: arched cabinets
Damon Nabors wrote:Patrick, that crown is from the Thermwood list.
Product ID: RP-FR-BEA0003 Description: Brittany Entertainment Armoire Top Molding
Thanks Damon