Ok, i'm having a little issue with the soft
Every time i open eCab, i've got NC Center installer poping up!?
I know that it normally comes with Solid Cabinet but i do not have this soft!!!!
And now, when i go into the shape manager, an installer starts?! And after every thing just freezes
As anyone had this kind of situation before?
TKS
Installer problem!
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Junior Member
- Posts: 79
- Joined: Tue, Mar 27 2007, 10:46AM
- Company Name: AVBN
- Country: CANADA
- Location: Quebec
-
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Re: Installer problem!
What is NC Center?
It sounds like some of your required eCabinets files are missing. You might try do a Repair by clicking the eCabinets icon in "Add/Remove Software" from the Control Panel. Be sure to choose Repair when the eCabinets installer starts.
It sounds like some of your required eCabinets files are missing. You might try do a Repair by clicking the eCabinets icon in "Add/Remove Software" from the Control Panel. Be sure to choose Repair when the eCabinets installer starts.
-
- Guru Member
- Posts: 459
- Joined: Tue, May 17 2005, 4:00PM
- Company Name: TBA
- Country: AUSTRALIA
- Location: ORANGE NSW AUSTRALIA every now and then between trips lol
Re: Installer problem!
lol when I read the topic heading I got excited, we always have problems with our cabinet installer onsite and thought it was a discussion on that.
Seriously though, have you ever had CV or NC installed on that computer? sometimes missing files can trigger the wrong install to fire up, I'd be doing Dan's suggestion of a repair. Also any good registry fix program to remove any references to CV/NC if your no longer using those programs would help.
Seriously though, have you ever had CV or NC installed on that computer? sometimes missing files can trigger the wrong install to fire up, I'd be doing Dan's suggestion of a repair. Also any good registry fix program to remove any references to CV/NC if your no longer using those programs would help.
This message made from recycled electrons.
-
- eCabinets Beta Tester
- Posts: 933
- Joined: Tue, May 17 2005, 2:48PM
- Location: Logansport, In
- Contact:
Re: Installer problem!
Hey Glenn,
We could start our own installer problems thread, but I doubt this forums server has the capacity if you get me going!!!!
We could start our own installer problems thread, but I doubt this forums server has the capacity if you get me going!!!!
Mike Murray
Versatile Cabinet & Solid Surface
mike@versatilecabinet.com
http://www.versatilecabinet.com
Versatile Cabinet & Solid Surface
mike@versatilecabinet.com
http://www.versatilecabinet.com
-
- Junior Member
- Posts: 79
- Joined: Tue, Mar 27 2007, 10:46AM
- Company Name: AVBN
- Country: CANADA
- Location: Quebec
Re: Installer problem!
LOL Ok, i'll fix this one!
Look guys, if you need a pro to install, just give me the addresses and i'll do it! (as long as you pay for the flight!!!) LOL
I know what you mean, i was on the road with a company before to repair every f*&%# up they were doing! Full year and a half, and fixed over 754 kitchens and installed 221 from scratch because of them!!!
Why do you think i have my own shop now and that i do all my instalations!
Tks for the advise Dan!
Look guys, if you need a pro to install, just give me the addresses and i'll do it! (as long as you pay for the flight!!!) LOL
I know what you mean, i was on the road with a company before to repair every f*&%# up they were doing! Full year and a half, and fixed over 754 kitchens and installed 221 from scratch because of them!!!
Why do you think i have my own shop now and that i do all my instalations!
Tks for the advise Dan!