DRAWER BOX ERROR
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Junior Member
- Posts: 90
- Joined: Wed, Dec 26 2007, 7:52PM
DRAWER BOX ERROR
After installing the 5.2 update I now have an error in the drawer box editor. When I add a drawer box the first message reads; "Failed in generating CNC data." I hit OK and this message pops up; "There was an unexpected error while handeling CNC data operation in Drawer Box edditor. Reverting to previous body." The drawer box is then added but it looks like the attachment. Is anyone else having this problem??
Re: DRAWER BOX ERROR
Could you attach the cabinet file then the drawer box file too?
Thanks
Thanks
-
- Junior Member
- Posts: 90
- Joined: Wed, Dec 26 2007, 7:52PM
Re: DRAWER BOX ERROR
I hope I did this right. Thanks!
Re: DRAWER BOX ERROR
The dado settings you are using on that drawer box are causing the problem. You will have to recreate your drawer box using the STD drawer box not any of the STD dovetail drawer boxes. I’ve got this listed for the programmers, sorry for the inconvenience.
-
- Junior Member
- Posts: 92
- Joined: Tue, Jan 23 2007, 12:29PM
- Company Name: Two Mile
- Location: NC
Re: DRAWER BOX ERROR
Hey Walter,
Speaking of drawer box. When I place a drawer base cabinet and I have to resize, the drawer box does not resize with it. Is there something that I can do, or is there something that I am not doing?
Thanks!
Speaking of drawer box. When I place a drawer base cabinet and I have to resize, the drawer box does not resize with it. Is there something that I can do, or is there something that I am not doing?
Thanks!
Sergio Fetter
Designer Specialist
Dell Vostro 230 - Intel(R) Core(TM)2 2 Duo CPU E7500 @ 2.93GHz 2.93 GHz
Ram 3GB - Windows 7 32-bit
Designer Specialist
Dell Vostro 230 - Intel(R) Core(TM)2 2 Duo CPU E7500 @ 2.93GHz 2.93 GHz
Ram 3GB - Windows 7 32-bit
Re: DRAWER BOX ERROR
Are you using the drawer box that you get the error from? Do you have minimum increment set for the drawer box that is not resizing correctly? Could you attach the cabinet with the drawer box before you resized it?
-
- Junior Member
- Posts: 92
- Joined: Tue, Jan 23 2007, 12:29PM
- Company Name: Two Mile
- Location: NC
Re: DRAWER BOX ERROR
Thanks,
Here it is.
Let me know the outcome on that.
Thanks again!
Here it is.
Let me know the outcome on that.
Thanks again!
- Attachments
-
- DB21.hsf
- (2.13 MiB) Downloaded 273 times
Sergio Fetter
Designer Specialist
Dell Vostro 230 - Intel(R) Core(TM)2 2 Duo CPU E7500 @ 2.93GHz 2.93 GHz
Ram 3GB - Windows 7 32-bit
Designer Specialist
Dell Vostro 230 - Intel(R) Core(TM)2 2 Duo CPU E7500 @ 2.93GHz 2.93 GHz
Ram 3GB - Windows 7 32-bit
-
- Wizard Member
- Posts: 1896
- Joined: Wed, May 18 2005, 7:54PM
- Company Name: Milltech Millworks Ltd.
- Country: CANADA
- Location: Edmonton, Alberta
- Contact:
Re: DRAWER BOX ERROR
Sergio, it resized for me OK.
- Attachments
-
- sergio.jpg (60.17 KiB) Viewed 6869 times
-
- Junior Member
- Posts: 92
- Joined: Tue, Jan 23 2007, 12:29PM
- Company Name: Two Mile
- Location: NC
Re: DRAWER BOX ERROR
Rick,
I appreciated. I am not sure what I did there for a few minutes.
Thank you!
I appreciated. I am not sure what I did there for a few minutes.
Thank you!
Sergio Fetter
Designer Specialist
Dell Vostro 230 - Intel(R) Core(TM)2 2 Duo CPU E7500 @ 2.93GHz 2.93 GHz
Ram 3GB - Windows 7 32-bit
Designer Specialist
Dell Vostro 230 - Intel(R) Core(TM)2 2 Duo CPU E7500 @ 2.93GHz 2.93 GHz
Ram 3GB - Windows 7 32-bit
-
- Senior Member
- Posts: 222
- Joined: Sun, Dec 11 2005, 1:22PM
- Location: Kennedale, Texas
- Contact:
Re: DRAWER BOX ERROR
That was happening to me as well. I would delete the drawer in the Door Drawer Editor the re choose the default drawer box and it works fine.
Lamar Horton
http://www.jlcustomcabinets.com
http://www.jlcustomcabinets.com
-
- Wizard Member
- Posts: 1896
- Joined: Wed, May 18 2005, 7:54PM
- Company Name: Milltech Millworks Ltd.
- Country: CANADA
- Location: Edmonton, Alberta
- Contact:
Re: DRAWER BOX ERROR
That's weird, cause I just adjusted the width of the cab and it followed along like it should.