Corner cabinets
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 527
- Joined: Tue, May 17 2005, 1:38PM
- Company Name: Janot Interiors Ltd
- Location: Calgary, Alberta, Canada
- Contact:
Corner cabinets
I am trying to place those corner cabinets where they belong but they don't want to go.
- Attachments
-
- Kitchen.esj
- (1010.02 KiB) Downloaded 265 times
Jean-Gabriel Voyer
Janot Interiors Ltd
www.customcabinetscalgary.com
Dell Precision PWS490, Intel Xeon CPU,3.00 GB Ram, Window XP Pro, Quadro Fx 3500
Janot Interiors Ltd
www.customcabinetscalgary.com
Dell Precision PWS490, Intel Xeon CPU,3.00 GB Ram, Window XP Pro, Quadro Fx 3500
-
- Junior Member
- Posts: 90
- Joined: Wed, Dec 26 2007, 7:52PM
Re: Corner cabinets
Jean, you can get them where you want but you need to use weird left to right measurements like -11.5 or 12. stuff like that. It is a process of trial and error. I have had this same issue pop up from time to time and I have not figured out why it happens. Hope this helps.
-
- Guru Member
- Posts: 527
- Joined: Tue, May 17 2005, 1:38PM
- Company Name: Janot Interiors Ltd
- Location: Calgary, Alberta, Canada
- Contact:
Re: Corner cabinets
Thanks Jerry.
For me it never happened before. Only since I upgraded to 5.2.
For me it never happened before. Only since I upgraded to 5.2.
Jean-Gabriel Voyer
Janot Interiors Ltd
www.customcabinetscalgary.com
Dell Precision PWS490, Intel Xeon CPU,3.00 GB Ram, Window XP Pro, Quadro Fx 3500
Janot Interiors Ltd
www.customcabinetscalgary.com
Dell Precision PWS490, Intel Xeon CPU,3.00 GB Ram, Window XP Pro, Quadro Fx 3500
-
- Guru Member
- Posts: 527
- Joined: Tue, May 17 2005, 1:38PM
- Company Name: Janot Interiors Ltd
- Location: Calgary, Alberta, Canada
- Contact:
Re: Corner cabinets
Jerry,
I tried your negative number inputs but it still doesn't work. . I hope the programmers will look into it on Monday because I have a lot of designing to do and it's taking me backwards.
I tried your negative number inputs but it still doesn't work. . I hope the programmers will look into it on Monday because I have a lot of designing to do and it's taking me backwards.
Jean-Gabriel Voyer
Janot Interiors Ltd
www.customcabinetscalgary.com
Dell Precision PWS490, Intel Xeon CPU,3.00 GB Ram, Window XP Pro, Quadro Fx 3500
Janot Interiors Ltd
www.customcabinetscalgary.com
Dell Precision PWS490, Intel Xeon CPU,3.00 GB Ram, Window XP Pro, Quadro Fx 3500
-
- Guru Member
- Posts: 527
- Joined: Tue, May 17 2005, 1:38PM
- Company Name: Janot Interiors Ltd
- Location: Calgary, Alberta, Canada
- Contact:
Re: Corner cabinets
Sorry, it works OK if I revert to 'Free style'.
Jean-Gabriel Voyer
Janot Interiors Ltd
www.customcabinetscalgary.com
Dell Precision PWS490, Intel Xeon CPU,3.00 GB Ram, Window XP Pro, Quadro Fx 3500
Janot Interiors Ltd
www.customcabinetscalgary.com
Dell Precision PWS490, Intel Xeon CPU,3.00 GB Ram, Window XP Pro, Quadro Fx 3500
-
- Wizard Member
- Posts: 1896
- Joined: Wed, May 18 2005, 7:54PM
- Company Name: Milltech Millworks Ltd.
- Country: CANADA
- Location: Edmonton, Alberta
- Contact:
Re: Corner cabinets
Jean, the dimensions for the corner cabs are not showing up correctly, old or new jobs. Maybe as a quick fix you can go to the LDE and check your dimensions there.
-
- Wizard Member
- Posts: 1896
- Joined: Wed, May 18 2005, 7:54PM
- Company Name: Milltech Millworks Ltd.
- Country: CANADA
- Location: Edmonton, Alberta
- Contact:
Re: Corner cabinets
Jean, I deleted cabs 2 and 3 and saved cab 1 and it placed with align to back.I don't think assemblies place like cabinets. Check out this attachment. I place these in the room first at 0 height then cabs at 4".
- Attachments
-
- Corner TK.hsf
- (150.02 KiB) Downloaded 253 times
-
- Guru Member
- Posts: 527
- Joined: Tue, May 17 2005, 1:38PM
- Company Name: Janot Interiors Ltd
- Location: Calgary, Alberta, Canada
- Contact:
Re: Corner cabinets
Rick,
What I did, I went to 'Free Style' and with the LDE I figured the dimensions and placed them without any troubles as assemblies.
The 'Align to back was creating all the fuss.
But thanks anyway. Your help is appreciated.
What I did, I went to 'Free Style' and with the LDE I figured the dimensions and placed them without any troubles as assemblies.
The 'Align to back was creating all the fuss.
But thanks anyway. Your help is appreciated.
Jean-Gabriel Voyer
Janot Interiors Ltd
www.customcabinetscalgary.com
Dell Precision PWS490, Intel Xeon CPU,3.00 GB Ram, Window XP Pro, Quadro Fx 3500
Janot Interiors Ltd
www.customcabinetscalgary.com
Dell Precision PWS490, Intel Xeon CPU,3.00 GB Ram, Window XP Pro, Quadro Fx 3500