I've just been attempting to fine tune a job for production tommorow morning & Suddenly E-Cabinets just wants to crash if I Hide Countertops & attempt to Select a Base cabinet. This job file was working fine before updating to 5.2.... I've been attempting to attach the file but no go at this time.
I'll try attaching the error message screenshot
Also I'm attachin a screenshot of a strange window regarding a range ( There is no range in this file )
E-Cabs crashing
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Senior Member
- Posts: 103
- Joined: Sat, Feb 10 2007, 8:11PM
- Location: Qualicum Beach, Beautiful British Columbia, Canada
- Contact:
E-Cabs crashing
- Attachments
-
- Strange window.jpg (54.49 KiB) Viewed 4698 times
-
- Crash.jpg (56.91 KiB) Viewed 4696 times
Rob
Re: E-Cabs crashing
Rob
if you can not post this file can you try and email it to me? I will see if I get the same message or not.
if you can not post this file can you try and email it to me? I will see if I get the same message or not.
-
- Senior Member
- Posts: 103
- Joined: Sat, Feb 10 2007, 8:11PM
- Location: Qualicum Beach, Beautiful British Columbia, Canada
- Contact:
Re: E-Cabs crashing
Hi Justin
I tried e mailing the file but received a message that file is to big for server ( 14.3 mb )
Mabe I'll try to zip it or something.
Rob
I tried e mailing the file but received a message that file is to big for server ( 14.3 mb )
Mabe I'll try to zip it or something.
Rob
Rob
-
- Senior Member
- Posts: 103
- Joined: Sat, Feb 10 2007, 8:11PM
- Location: Qualicum Beach, Beautiful British Columbia, Canada
- Contact:
Re: E-Cabs crashing
Trying Zipped File
- Attachments
-
- basement office (revised).zip
- (5.74 MiB) Downloaded 294 times
Rob
-
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: E-Cabs crashing
Rob,
The job has a corrupt appliance segment in it that originated and existed in the 5.1 job (not sure how it happened). Hence the tool tip pop up on your 1st picture posted here. 5.2's new layout does not seem to tolerate it as well as 5.1 did. We will have the software look for this situation in the future and heal itself.
The good new is you can fix this right now by following these steps.
1.) Load the job
2.) From the Right click menu choose Select-> Select All Appliances
3.) Press the Delete key on the keyboard and answer OK to the "Are you sure?" message.
4.) Save the job and all should be fine.
Let me know if this does not work for you.
The job has a corrupt appliance segment in it that originated and existed in the 5.1 job (not sure how it happened). Hence the tool tip pop up on your 1st picture posted here. 5.2's new layout does not seem to tolerate it as well as 5.1 did. We will have the software look for this situation in the future and heal itself.
The good new is you can fix this right now by following these steps.
1.) Load the job
2.) From the Right click menu choose Select-> Select All Appliances
3.) Press the Delete key on the keyboard and answer OK to the "Are you sure?" message.
4.) Save the job and all should be fine.
Let me know if this does not work for you.
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
-
- Senior Member
- Posts: 103
- Joined: Sat, Feb 10 2007, 8:11PM
- Location: Qualicum Beach, Beautiful British Columbia, Canada
- Contact:
Re: E-Cabs crashing
Thanks Scott
That did the trick.
I was looking off in the distance etc to find a applience to delete but I could not find one & I didn't notice the select all applience feature.
I learn something every day...
That did the trick.
I was looking off in the distance etc to find a applience to delete but I could not find one & I didn't notice the select all applience feature.
I learn something every day...
Rob