deleting adjustable shlving holes

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
David Kopriva
New Member
Posts: 22
Joined: Tue, May 31 2005, 4:56PM
Location: Calgary Alberta

deleting adjustable shlving holes

Post by David Kopriva »

Having a bear of a time with deleting hole pattern for adjustable shelves. Since the plans specify pilasters I have placed dados to receive the pilasters( some guys call then standards) and then I removed the check mark in the adjustable shelf tab. But the holes won't go away. They even show up in the nesting diagram. Need help. :wall:
Rick Palechuk
Wizard Member
Posts: 1896
Joined: Wed, May 18 2005, 7:54PM
Company Name: Milltech Millworks Ltd.
Country: CANADA
Location: Edmonton, Alberta
Contact:

Re: deleting adjustable shlving holes

Post by Rick Palechuk »

Can you post your file please David.
Daniel Vonderheide
Thermwood Team
Posts: 361
Joined: Wed, May 17 2006, 11:25AM
Location: Thermwood

Re: deleting adjustable shlving holes

Post by Daniel Vonderheide »

David,
Take the cabinet into the shelf editor. Left click on the shelf so it has a green outline on it. Click on the construction settings button in the secondary tool bar. Switch fron fixed to adjustable shelf. You should now see that the "apply shelf holes" is checked. Uncheck it and click okay. This will rebuild the cabinet withoout the holes.
David Kopriva
New Member
Posts: 22
Joined: Tue, May 31 2005, 4:56PM
Location: Calgary Alberta

Re: deleting adjustable shlving holes

Post by David Kopriva »

Thanks Guys
I was fooling around and finally got there just as suggested :beer:
Post Reply