I have a problem with the program taking 1/4" off of all door and drawer fronts when it generates the cut list. I has only started this with this last job and it makes me wonder if I am doing something wrong. It shows them correctly in the cabinet editor (correct size) but a door that is 22H x15W shows in the cut list as 21 3/4H x 14 3/4W. Any help would be greatly appreaciated.
~~joe ford~~
Wrong door and drawer front sizes in cut list
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
Re: Wrong door and drawer front sizes in cut list
Joe,
It sounds like you have Edge Banding applied to the doors and drawers?
To fix...
Goto define materials and create some edge banding with a thickness of zero (0")
Go into the door/drawer editor and apply the EB with the thickness of zero to the door/drawer
Set as default
delete and re-apply the doors/drawers
If this is not the case let me know.
It sounds like you have Edge Banding applied to the doors and drawers?
To fix...
Goto define materials and create some edge banding with a thickness of zero (0")
Go into the door/drawer editor and apply the EB with the thickness of zero to the door/drawer
Set as default
delete and re-apply the doors/drawers
If this is not the case let me know.
Re: Wrong door and drawer front sizes in cut list
Thanks Todd... I have been beating my head against the wall for a week trying to figure this out... i feel really stupid now because it was something so simple... Thanks again