Reinstall

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Douglas Walters
Junior Member
Posts: 44
Joined: Mon, Mar 13 2006, 6:35PM
Location: Sussex WI

Reinstall

Postby Douglas Walters » Fri, Aug 22 2008, 2:14PM

I reformatted the hard drive, turned off my antivires and tried to install eCabinets and get the following error,
1305.Error reading from C:\Program Files\Thermwood\eCabinet Systems\hoops1106.dll. Verify that the files exists and that you can acces it. I have a M70, cleaned the disk(Version 5), tried to reinstall with the same error.
Thanks for helping with the reinstall.
Douglas Walters
D Walters
Wood Architects

Rick Deskins
Thermwood Team
Posts: 854
Joined: Tue, May 17 2005, 12:47PM
Company Name: Thermwood
Country: UNITED STATES
Location: Thermwood

Re: Reinstall

Postby Rick Deskins » Fri, Aug 22 2008, 2:50PM

After installing from the disc, you need to install the latest patch.

http://downloads.thermwood.com/eCabinetSystemsV5-2Build-2.exe
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900

Douglas Walters
Junior Member
Posts: 44
Joined: Mon, Mar 13 2006, 6:35PM
Location: Sussex WI

Re: Reinstall

Postby Douglas Walters » Fri, Aug 22 2008, 3:13PM

Hi Rick,
The error comes up before it finishes the install from the disk. I can't even think about updating yet.
Thanks,
Douglas Walters
D Walters

Wood Architects

Rick Palechuk
Wizard Member
Posts: 1896
Joined: Wed, May 18 2005, 7:54PM
Company Name: Milltech Millworks Ltd.
Country: CANADA
Location: Edmonton, Alberta
Contact:

Re: Reinstall

Postby Rick Palechuk » Fri, Aug 22 2008, 4:52PM

Douglas, try updating or reinstalling the drivers for your CD-ROM or DVD drive.

Douglas Walters
Junior Member
Posts: 44
Joined: Mon, Mar 13 2006, 6:35PM
Location: Sussex WI

Re: Reinstall

Postby Douglas Walters » Thu, Aug 28 2008, 9:37PM

Thanks Rick,
Updated the firmware, uninstalled AVG, rebooted, tried to reinstall ecab, 80% done and a different error 1305 comes up.
Errorreading from file C:\Program Files\Thermwood\eCabinet Systems\hardware\Wood Components\Hafele\Hf-194-78-335.hsf. Verify that the file exists and that you can acces it. Retry or cancel. Retry comes up with the same error.
The Hafele component should be on the disk.
What should my next step be? :wall:
I retried and it is the same as above except says .jpg.
Where would I verify this exists? :cry:
D Walters

Wood Architects

User avatar
DanEpps
Wizard Member
Posts: 5852
Joined: Thu, Jul 28 2005, 10:18AM
Company Name: Dan Epps
Country: UNITED STATES
Location: Rocky Face GA

Re: Reinstall

Postby DanEpps » Fri, Aug 29 2008, 6:20AM

Try uninstalling eCabinets before starting the reinstall.

Are you running Vista? If so, make sure you are following the Vista installation instructions in the sticky at the top of the forum.

Douglas Walters
Junior Member
Posts: 44
Joined: Mon, Mar 13 2006, 6:35PM
Location: Sussex WI

Re: Reinstall

Postby Douglas Walters » Wed, Sep 03 2008, 2:46PM

Hi Dan,
eCab has not been installed on this after the reformat. I am running XP and have checked the add/remove programs and there is nothing to remove.
D Walters

Wood Architects

Douglas Walters
Junior Member
Posts: 44
Joined: Mon, Mar 13 2006, 6:35PM
Location: Sussex WI

Re: Reinstall

Postby Douglas Walters » Wed, Sep 03 2008, 6:13PM

Hey Guy's,
Can anyone from Thermwood help out? I need to get this installed.
Thanks
D Walters

Wood Architects

Justin Melhiser

Re: Reinstall

Postby Justin Melhiser » Thu, Sep 04 2008, 7:49AM

Doug
Try to download the latest update first from the internet. I know that you do not have the software installed yet but I am thinking since it is a version 5 disk, if you download the update frist and run it then try to install the cd. If this does not work you can email me, call, or post back on here.


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: No registered users and 14 guests