Door changing size

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Lamar Horton
Senior Member
Posts: 222
Joined: Sun, Dec 11 2005, 1:22PM
Location: Kennedale, Texas
Contact:

Door changing size

Post by Lamar Horton »

I have an angled upper corner cabinet with two doors, upper and lower, the upper door maintains it's size with the proper overlays but the lower door does not. When I add the door it correctly sizes it but when I go to the main area from the door area the overlays vanish and the door resizes itself.

Here is the cabinet
Attachments
Upper Corner w_garage.hsf
(570.02 KiB) Downloaded 272 times
Walker T Scott

Re: Door changing size

Post by Walker T Scott »

This is a bug and I have passed it along to the programmers. This is something you could try for a work around. Add a bottom rail that has a width of .125 to the bottom opening then change your bottom overlap to 0 when you re add the bottom door. Hope this works for you and sorry for the inconvenience.
ScotAcree
Senior Member
Posts: 101
Joined: Mon, Aug 08 2005, 6:06PM
Company Name: Scot Acree Woodworkig LLC
Country: UNITED STATES
Location: Ohio

Re: Door changing size

Post by ScotAcree »

Yes,
I added your .75" bottom rail back and it started resizing the correct width.

Scot
Lamar Horton
Senior Member
Posts: 222
Joined: Sun, Dec 11 2005, 1:22PM
Location: Kennedale, Texas
Contact:

Re: Door changing size

Post by Lamar Horton »

Thanks Walker that did the job.
Post Reply