I have an angled upper corner cabinet with two doors, upper and lower, the upper door maintains it's size with the proper overlays but the lower door does not. When I add the door it correctly sizes it but when I go to the main area from the door area the overlays vanish and the door resizes itself.
Here is the cabinet
Door changing size
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Senior Member
- Posts: 222
- Joined: Sun, Dec 11 2005, 1:22PM
- Location: Kennedale, Texas
- Contact:
Door changing size
- Attachments
-
- Upper Corner w_garage.hsf
- (570.02 KiB) Downloaded 275 times
Lamar Horton
http://www.jlcustomcabinets.com
http://www.jlcustomcabinets.com
Re: Door changing size
This is a bug and I have passed it along to the programmers. This is something you could try for a work around. Add a bottom rail that has a width of .125 to the bottom opening then change your bottom overlap to 0 when you re add the bottom door. Hope this works for you and sorry for the inconvenience.
-
- Senior Member
- Posts: 101
- Joined: Mon, Aug 08 2005, 6:06PM
- Company Name: Scot Acree Woodworkig LLC
- Country: UNITED STATES
- Location: Ohio
Re: Door changing size
Yes,
I added your .75" bottom rail back and it started resizing the correct width.
Scot
I added your .75" bottom rail back and it started resizing the correct width.
Scot
-
- Senior Member
- Posts: 222
- Joined: Sun, Dec 11 2005, 1:22PM
- Location: Kennedale, Texas
- Contact: