Hello.
I created all the cabinets in an office and I wanted to show the correct wood species on the material and cut list. I selected Walnut for all the pieces. For some reason the face frames are not updating correctly. The upper and lower face frame have both changed to walnut and the cut list reflects this correctly (as well as the graphics in the program), however the mid stile and rail wont change. They still look like Alder and show Alder in the cut list even though Walnut is selected in the drop down menu in Face Frames. It's just those two pieces in the entire project that are doing this on all the cabinets.
Any thoughts?
Adam
Material Not Updating
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Junior Member
- Posts: 62
- Joined: Mon, Mar 16 2009, 8:28PM
- Company Name: VCC
-
- Wizard Member
- Posts: 1896
- Joined: Wed, May 18 2005, 7:54PM
- Company Name: Milltech Millworks Ltd.
- Country: CANADA
- Location: Edmonton, Alberta
- Contact:
Re: Material Not Updating
Hey Adam, take the cabinet back to the Faceframe Editor then while holding the ctrl key click on the mid stile and rail to hilite them, then right click, construction settings, go to page two, click All then ok and return to main.