When I add RTA fittings to the top of my cabinet 2 things are happening. The top disappears from the cutlist, and when nested, the thickness of the edgebanding is no longer subtracted from the part.
I've tried deleting the part, and recreating it, but keep getting the same results.
Top not Cutlisting Correctly/ RTA Fitting
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- eCabinets Beta Tester
- Posts: 491
- Joined: Wed, Apr 15 2009, 8:22PM
- Company Name: Plymouth Custom Closets
- Country: UNITED STATES
- Location: Plympton, MA
Top not Cutlisting Correctly/ RTA Fitting
http://www.plymouthcustomclosets.com
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
-
- Junior Member
- Posts: 39
- Joined: Sat, Apr 04 2009, 10:20PM
- Company Name: Azure Cabinets
Re: Top not Cutlisting Correctly/ RTA Fitting
Hi Nat,
I downloaded your file and I am having the same problem. I removed the RTA fittings and the problem goes away. I will try rebuilding the cabinet from scratch this weekend. To see if the same thing happens. I hope that Thermwood will chime in on this post.
I downloaded your file and I am having the same problem. I removed the RTA fittings and the problem goes away. I will try rebuilding the cabinet from scratch this weekend. To see if the same thing happens. I hope that Thermwood will chime in on this post.
-
- Junior Member
- Posts: 39
- Joined: Sat, Apr 04 2009, 10:20PM
- Company Name: Azure Cabinets
Re: Top not Cutlisting Correctly/ RTA Fitting
Hi Nat,
If you remove the edge banding from the top, the top shows back up in the cut list.
I did a quick build using a standard base as a seed cabinet using your dimensions, but with out hanger holes and notch and everything works fine (top shows up in cut list.)
Try removing and redoing the notch and hanger holes one at a time. I think there is a conflict with the edgebanding.
Sorry I could not spend more time on it right now I under a deadline. Let me know what you find out.
If you remove the edge banding from the top, the top shows back up in the cut list.
I did a quick build using a standard base as a seed cabinet using your dimensions, but with out hanger holes and notch and everything works fine (top shows up in cut list.)
Try removing and redoing the notch and hanger holes one at a time. I think there is a conflict with the edgebanding.
Sorry I could not spend more time on it right now I under a deadline. Let me know what you find out.
-
- eCabinets Beta Tester
- Posts: 491
- Joined: Wed, Apr 15 2009, 8:22PM
- Company Name: Plymouth Custom Closets
- Country: UNITED STATES
- Location: Plympton, MA
Re: Top not Cutlisting Correctly/ RTA Fitting
Thanks Chris. I'll play around with the notch and holes and see if that's tied into the error. In the meantime, I removed the banding from the front edge of the top, and set the top back, from the front of the cabinet, the thickness of the banding. This works, but isn't ideal.
In the meantime, if others have feedback on this issue please let me know.
Thanks.
In the meantime, if others have feedback on this issue please let me know.
Thanks.
http://www.plymouthcustomclosets.com
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3