Hi.
This attached assembly is showing 36 1/2" high when it's placed in the room. By all accounts is should be only 36" high. I have it sitting right next to a slightly different assembly that IS 36" high and also measures that too. When I look at them both rendered, they appear to be exactly in line with each other. When I take this assembly into the line editor it also measures 36" in total height (5" toe plus 31" cabinet).
The only problem I see is when I float my mouse over it in the room the popup window says that it is 36 1/2".
This makes me nervous.
Can you look at this and see if there is an issue with it?
Thanks,
Adam
Assembly height is wrong, why?
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Junior Member
- Posts: 62
- Joined: Mon, Mar 16 2009, 8:28PM
- Company Name: VCC
Assembly height is wrong, why?
- Attachments
-
- Assembly 1.jpg (9.19 KiB) Viewed 1994 times
-
- Assembly 1.esa
- (772.02 KiB) Downloaded 231 times
Re: Assembly height is wrong, why?
Hi Adam,
I brought the cabinet into the assemble editor and custom layout and they show 36" total height.
In measuring in the line drawing editor i still get 36".
I'm unsure why you are getting 36.5".
I am running Version 5.2 Build 5.
I brought the cabinet into the assemble editor and custom layout and they show 36" total height.
In measuring in the line drawing editor i still get 36".
I'm unsure why you are getting 36.5".
I am running Version 5.2 Build 5.