Grain Direction for FF

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Adam DAgosto
Junior Member
Posts: 62
Joined: Mon, Mar 16 2009, 8:28PM
Company Name: VCC

Grain Direction for FF

Postby Adam DAgosto » Sun, May 17 2009, 11:23PM

Hi.

I have a box (attached) that has the entire front of it closed up by using a Face Frame. I changed the material to plywood.

My question is, is there a way to change the direction of the grain? I can't seem to see a way to do that for the Face Frames. It's not a huge issue because I can just tell my builder what to do, but just for rendering, and of course learning how, I'd like to know if there's a way to do that.

I just want to have the grain going vertically, right now its horizontal.

Thanks guys.

Adam
Attachments
Side Box.hsf
(142.02 KiB) Downloaded 58 times
Side Box.jpg
Side Box.jpg (3.29 KiB) Viewed 805 times

Bryan J Tanner
Guru Member
Posts: 270
Joined: Wed, Mar 18 2009, 4:51AM
Company Name: Decor Designz
Location: Paeroa NZ
Contact:

Re: Grain Direction for FF

Postby Bryan J Tanner » Sun, May 17 2009, 11:49PM

I had this very same problem at about 2am this morning.

What I did in the end was to create a display panel and associate it to the cabinet.

Hope this helps
HP Pavilion DV6
2.27 gigahertz Intel Core i5 M 430
3064 Megabytes Usable Installed Memory
NVIDIA GeForce GT 230M
Windows 7 Home Premium

User avatar
DanEpps
Wizard Member
Posts: 5852
Joined: Thu, Jul 28 2005, 10:18AM
Company Name: Dan Epps
Country: UNITED STATES
Location: Rocky Face GA

Re: Grain Direction for FF

Postby DanEpps » Mon, May 18 2009, 6:09AM

Use a stile instead of a rail.

Using a Display Panel is the best way to get the result you want. Just add one sized to the correct dimensions and associate it to the cabinet.

Adam DAgosto
Junior Member
Posts: 62
Joined: Mon, Mar 16 2009, 8:28PM
Company Name: VCC

Re: Grain Direction for FF

Postby Adam DAgosto » Mon, May 18 2009, 7:17PM

Perfect.

Thanks guys.

Adam


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: Bing [Bot] and 2 guests