Hi.
I have a box (attached) that has the entire front of it closed up by using a Face Frame. I changed the material to plywood.
My question is, is there a way to change the direction of the grain? I can't seem to see a way to do that for the Face Frames. It's not a huge issue because I can just tell my builder what to do, but just for rendering, and of course learning how, I'd like to know if there's a way to do that.
I just want to have the grain going vertically, right now its horizontal.
Thanks guys.
Adam
Grain Direction for FF
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Junior Member
- Posts: 62
- Joined: Mon, Mar 16 2009, 8:28PM
- Company Name: VCC
Grain Direction for FF
- Attachments
-
- Side Box.hsf
- (142.02 KiB) Downloaded 345 times
-
- Side Box.jpg (3.29 KiB) Viewed 4850 times
-
- Guru Member
- Posts: 270
- Joined: Wed, Mar 18 2009, 4:51AM
- Company Name: Decor Designz
- Location: Paeroa NZ
- Contact:
Re: Grain Direction for FF
I had this very same problem at about 2am this morning.
What I did in the end was to create a display panel and associate it to the cabinet.
Hope this helps
What I did in the end was to create a display panel and associate it to the cabinet.
Hope this helps
HP Pavilion DV6
2.27 gigahertz Intel Core i5 M 430
3064 Megabytes Usable Installed Memory
NVIDIA GeForce GT 230M
Windows 7 Home Premium
2.27 gigahertz Intel Core i5 M 430
3064 Megabytes Usable Installed Memory
NVIDIA GeForce GT 230M
Windows 7 Home Premium
-
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Re: Grain Direction for FF
Use a stile instead of a rail.
Using a Display Panel is the best way to get the result you want. Just add one sized to the correct dimensions and associate it to the cabinet.
Using a Display Panel is the best way to get the result you want. Just add one sized to the correct dimensions and associate it to the cabinet.
-
- Junior Member
- Posts: 62
- Joined: Mon, Mar 16 2009, 8:28PM
- Company Name: VCC
Re: Grain Direction for FF
Perfect.
Thanks guys.
Adam
Thanks guys.
Adam