won't nest whole job

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Lorin Ylioja
Junior Member
Posts: 39
Joined: Tue, Apr 14 2009, 10:25PM
Company Name: Heritage Woodcraft
Location: Conquest Saskatchewan

won't nest whole job

Post by Lorin Ylioja »

Hi
I have desig ed a complete kitchen in the custom layout but when I try nest it only some of the cabinets nest. I get no error message or parts won't nest. It acts as if it only sees about half of the job. When I try saved jobs it works.
thank you
Lorin
Lorin Ylioja
Junior Member
Posts: 39
Joined: Tue, Apr 14 2009, 10:25PM
Company Name: Heritage Woodcraft
Location: Conquest Saskatchewan

Re: won't nest whole job

Post by Lorin Ylioja »

In case it makes a difference the cut list is complete and individual cabinets nest.
thanks again
Lorin
Iain Hall
Junior Member
Posts: 44
Joined: Mon, Jun 09 2008, 11:11AM
Location: Sask. Canada

Re: won't nest whole job

Post by Iain Hall »

Did you check the filtering to see if for some reason some of the cabinets are turned of in there
Iain Hall
Woodwright Cabinets
Lorin Ylioja
Junior Member
Posts: 39
Joined: Tue, Apr 14 2009, 10:25PM
Company Name: Heritage Woodcraft
Location: Conquest Saskatchewan

Re: won't nest whole job

Post by Lorin Ylioja »

I checked this now and all the cabinets are checked. I think it is actually nesting 6 or 7 of the 20.
Thanks for this advice. I had never used the filter before.
Lorin
Iain Hall
Junior Member
Posts: 44
Joined: Mon, Jun 09 2008, 11:11AM
Location: Sask. Canada

Re: won't nest whole job

Post by Iain Hall »

That uses up all I know there are others here that can make E cab dance if they want to. I know just enough to be dangerous.
Iain Hall
Woodwright Cabinets
Kerry Fullington
Wizard Member
Posts: 4718
Joined: Mon, May 09 2005, 7:33PM
Company Name: Double E Cabinets
Country: UNITED STATES
Location: Amarillo, TX

Re: won't nest whole job

Post by Kerry Fullington »

Ian,

Did you try re-starting your comoputer and then nest the job?

Post your job so we can try to nest it.

Kerry
Lorin Ylioja
Junior Member
Posts: 39
Joined: Tue, Apr 14 2009, 10:25PM
Company Name: Heritage Woodcraft
Location: Conquest Saskatchewan

Re: won't nest whole job

Post by Lorin Ylioja »

Thanks for the help. Your email got me straightened out Kerry.
Leo Graywacz
Guru Member
Posts: 640
Joined: Tue, Jan 16 2007, 7:56PM
Company Name: LRG WoodCrafting
Location: Windsor Locks, CT
Contact:

Re: won't nest whole job

Post by Leo Graywacz »

OK Kerry, spill it. What was in the email that made things all better. :mrgreen:
Dell Precision 7710
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit

http://lrgwood.com
Lorin Ylioja
Junior Member
Posts: 39
Joined: Tue, Apr 14 2009, 10:25PM
Company Name: Heritage Woodcraft
Location: Conquest Saskatchewan

Re: won't nest whole job

Post by Lorin Ylioja »

I had to delete the toe kick on one cabinet. I am not sure why, but it worked after this.
Lorin
Post Reply