how to create in ecabinets

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
mohan kommineni
Junior Member
Posts: 97
Joined: Fri, Mar 20 2009, 8:01AM
Company Name: ADP STORE FIXTURES
Country: AUSTRALIA
Location: PERTH-AUSTRALIA

how to create in ecabinets

Post by mohan kommineni »

we are trying to make few bases which are round. how to construct round base of 500 diameter is there any option to do in cabinets i tried to do it by taking a square and fillet it in cabinet editor but failed it doesnt allow 4th side filet got stuck,anyone had tryed to create round base pls suggest
Nick M Singer
Guru Member
Posts: 828
Joined: Fri, Jun 17 2005, 12:23AM
Location: South Africa

Re: how to create in ecabinets

Post by Nick M Singer »

It should be very easy to do in the part editor, use the "contour" icon and create an arc or circle there by selcting the circle/arc icon. Afterwards you can create a part using a closed contour.
Ryan Hochgesang

Re: how to create in ecabinets

Post by Ryan Hochgesang »

For future reference, this posting would be best located under the eCabinet section of the forum. This would allow more communication with those who are specifically using eCabinets.

Link:

http://www.thermwood.com/forums/viewforum.php?f=3


Thank you!
mohan kommineni
Junior Member
Posts: 97
Joined: Fri, Mar 20 2009, 8:01AM
Company Name: ADP STORE FIXTURES
Country: AUSTRALIA
Location: PERTH-AUSTRALIA

Re: how to create in ecabinets

Post by mohan kommineni »

Nick M Singer wrote:It should be very easy to do in the part editor, use the "contour" icon and create an arc or circle there by selcting the circle/arc icon. Afterwards you can create a part using a closed contour.

hi nick
thanks for giving the hint that helped me.
mohan kommineni
Junior Member
Posts: 97
Joined: Fri, Mar 20 2009, 8:01AM
Company Name: ADP STORE FIXTURES
Country: AUSTRALIA
Location: PERTH-AUSTRALIA

Re: how to create in ecabinets

Post by mohan kommineni »

Ryan Hochgesang wrote:For future reference, this posting would be best located under the eCabinet section of the forum. This would allow more communication with those who are specifically using eCabinets.

Link:

http://www.thermwood.com/forums/viewforum.php?f=3


Thank you!


i agree with u ryan i request the admin to take a chance and move the post to relevant section

Thank you
Post Reply