Knob/Pull Hole Pattern
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- eCabinets Beta Tester
- Posts: 491
- Joined: Wed, Apr 15 2009, 8:22PM
- Company Name: Plymouth Custom Closets
- Country: UNITED STATES
- Location: Plympton, MA
Knob/Pull Hole Pattern
Is there a way to associate a hole pattern with a knob or pull? I did a search of the archived posts a while back and didn't come across a method, but wanted to double check here also. Thanks.
http://www.plymouthcustomclosets.com
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
-
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Re: Knob/Pull Hole Pattern
Not that I know of.
-
- Wizard Member
- Posts: 4723
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Knob/Pull Hole Pattern
Nat,
I think that has been on the wish list for added features for a while but not implemented yet.
Kerry
I think that has been on the wish list for added features for a while but not implemented yet.
Kerry
-
- eCabinets Beta Tester
- Posts: 491
- Joined: Wed, Apr 15 2009, 8:22PM
- Company Name: Plymouth Custom Closets
- Country: UNITED STATES
- Location: Plympton, MA
Re: Knob/Pull Hole Pattern
Thanks. It would be a nice feature, and save several steps. Hopefully they will add it.
Nat
Nat
http://www.plymouthcustomclosets.com
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
-
- Wizard Member
- Posts: 4723
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Knob/Pull Hole Pattern
Nat,
Be sure to go to Communications then Feedback and send this in to the programmers as an added feature request. Don't assume that Thermwood will see your request here. The more requests for a feature gives it a better chance to be added. (Squeaky wheel)
Kerry
Be sure to go to Communications then Feedback and send this in to the programmers as an added feature request. Don't assume that Thermwood will see your request here. The more requests for a feature gives it a better chance to be added. (Squeaky wheel)
Kerry
-
- eCabinets Beta Tester
- Posts: 491
- Joined: Wed, Apr 15 2009, 8:22PM
- Company Name: Plymouth Custom Closets
- Country: UNITED STATES
- Location: Plympton, MA
Re: Knob/Pull Hole Pattern
Hadn't even seen the 'Communications' tab until now. Thanks!
http://www.plymouthcustomclosets.com
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
-
- eCabinets Beta Tester
- Posts: 1585
- Joined: Tue, May 17 2005, 1:16PM
- Location: Norwood Pa.
Re: Knob/Pull Hole Pattern
Would this work for anyone
I made a DXF with holes lay ed out every 1/4" on the drawer up to 6" off the center
I started out with a base cab 24 x 34.5 x 24 with slad drawer I set my hole pattern to what I wanted. Then I can resize
the cabinet to the size I want to use.The holes stay in the center of any cabinet size
Try it
I made a DXF with holes lay ed out every 1/4" on the drawer up to 6" off the center
I started out with a base cab 24 x 34.5 x 24 with slad drawer I set my hole pattern to what I wanted. Then I can resize
the cabinet to the size I want to use.The holes stay in the center of any cabinet size
Try it
- Attachments
-
- Drawer Holes.zip
- (64.47 KiB) Downloaded 225 times
-
- Drawer_20.75 x 6.7812.jpg (32.65 KiB) Viewed 3851 times
-
- E-Cabinet.jpg (42.25 KiB) Viewed 3851 times