Printing Labels

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Steve Detina
Junior Member
Posts: 74
Joined: Wed, Jul 20 2005, 7:29AM
Company Name: Silhouette Custom Cabinets
Country: CANADA
Location: Hamilton, Ontario

Printing Labels

Postby Steve Detina » Wed, Jun 24 2009, 9:38AM

Not sure if this is in the right place but a little while back the boys at thermwood changed how we print from the machine. When the change was made we lost the ability to print out just bar codes. Is there anyway we can get that back. We often print just bar code for the offalls because we do not need all the labels for the cabinets or components.

thanks

Steve

FredHirsch
Senior Member
Posts: 167
Joined: Tue, Oct 03 2006, 6:51PM
Location: Phoenix, AZ
Contact:

Re: Printing Labels

Postby FredHirsch » Wed, Jun 24 2009, 3:28PM

Steve,
I'm with you on this... We've been throwing away a lot of labels just to get that off-fall label.
Fred
Fred Hirsch

User avatar
Jeremy Schiffer
eCabinets Beta Tester
Posts: 944
Joined: Tue, May 10 2005, 9:36PM
Location: Carnesville, GA
Contact:

Re: Printing Labels

Postby Jeremy Schiffer » Wed, Jun 24 2009, 11:36PM

You can still print only the barcoded labels, but it's a bit confusing now. When you're at the print dialog, you have a button that says "Select file" or something similar. Click it, and you'll get a file list of the different labels. Look for one that has the word "barcode" in it, along with the number of the label you're using.

Hopefully this gets you going... I'm not at the machine right now so I'm doing it from memory. (And my memory SUCKS. LOL)
http://www.corlanecabinetry.com

Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit

FredHirsch
Senior Member
Posts: 167
Joined: Tue, Oct 03 2006, 6:51PM
Location: Phoenix, AZ
Contact:

Re: Printing Labels

Postby FredHirsch » Fri, Jun 26 2009, 1:39PM

Jeremy,
Thanks for the heads up.... I was a bit surprised that it could have been removed.
Thanks,
Fred
Fred Hirsch

User avatar
Brad McIntosh
Guru Member
Posts: 480
Joined: Wed, May 18 2005, 6:59PM
Company Name: CNC Automation
Location: St. Zotique, Québec, Canada
Contact:

Re: Printing Labels - Off-Falls Only

Postby Brad McIntosh » Fri, Jun 26 2009, 4:36PM

Here is a label formatted to print ONLY OFF-FALLS...

:!: >> No warranties are expressed on implied. The label has been tested but it's use is your own responsibility.

  • Download and save the attached ZIP file to your Desktop.
  • Unzip the contents and copy the "30252_Address_Barcode_Off_Falls.RPT" file into the "C:\Rolling Nest\Labels\" directory on the Thermwood controller.
  • Make sure to select this new label format to print labels with barcodes for OFF-FALLS ONLY.

(Here's to saving labels if you don't need them all! :D )

Cheers! :beer:
Attachments
30252_Address_Barcode_Off_Falls.zip
Standard 30252 Address Label with Barcodes for OFF-CUTS ONLY.
(4.83 KiB) Downloaded 131 times

User avatar
Brad McIntosh
Guru Member
Posts: 480
Joined: Wed, May 18 2005, 6:59PM
Company Name: CNC Automation
Location: St. Zotique, Québec, Canada
Contact:

Re: Printing Labels - Off-Falls Only Updated

Postby Brad McIntosh » Tue, Jun 30 2009, 11:53AM

I have updated the above "custom" label I had posted previously to indicate the SHEET and "Part #" associated with the Off-Fall.

:!: >> No warranties are expressed or implied. The label has been tested but it's use is your own responsibility.

  • Download and save the attached ZIP file to your Desktop.
  • Unzip the contents and copy the "30252_Address_Barcode_Off_Falls.RPT" file into the "C:\Rolling Nest\Labels\" directory on the Thermwood controller.
    :arrow: (If you had tried out the earlier one, make sure that you over-write it with this newer version.)
  • Make sure to select this new label format to print labels with barcodes for OFF-FALLS ONLY.
Attachments
30252_Address_Barcode_Off_Falls-2.zip
Rev 2- Standard 30252 Address Label with Barcodes for OFF-CUTS ONLY
(4.97 KiB) Downloaded 138 times


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: No registered users and 11 guests