I've redone the drawer front on this cabinet a number of times, rotating the grain 90 degrees to line up with the doors. When I try to group the drawer front together with the doors, I get the error 'grain direction does not match this group'.
Also, many times when I've gone back in to change the grain direction on the drawer front, it adds an additional 3mm to the top reveal?
Any ideas what I'm doing wrong?
Grain Direction on Drawer Fornt Won't Stick
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- eCabinets Beta Tester
- Posts: 491
- Joined: Wed, Apr 15 2009, 8:22PM
- Company Name: Plymouth Custom Closets
- Country: UNITED STATES
- Location: Plympton, MA
Grain Direction on Drawer Fornt Won't Stick
http://www.plymouthcustomclosets.com
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
-
- Wizard Member
- Posts: 5852
- Joined: Thu, Jul 28 2005, 10:18AM
- Company Name: Dan Epps
- Country: UNITED STATES
- Location: Rocky Face GA
Re: Grain Direction on Drawer Fornt Won't Stick
Try ungrouping the parts before changing the grain rotation.
-
- eCabinets Beta Tester
- Posts: 491
- Joined: Wed, Apr 15 2009, 8:22PM
- Company Name: Plymouth Custom Closets
- Country: UNITED STATES
- Location: Plympton, MA
Re: Grain Direction on Drawer Fornt Won't Stick
Thanks. Foolishly, I was using an image without a grain pattern for the door and drawer front material. Once I changed to an image with grain, I was able see fairly quickly what I was doing wrong.
http://www.plymouthcustomclosets.com
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3