Fixed shelf protruding from cabinet

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Donald Thomson
Guru Member
Posts: 666
Joined: Thu, May 14 2009, 11:41PM
Company Name: Diamond Lake Custom Woodworks
Location: Newport, WA
Contact:

Fixed shelf protruding from cabinet

Postby Donald Thomson » Tue, Jul 14 2009, 7:19PM

I'm trying to get the fixed shelf in the attached cabinet to be flush with the back and front of the cabinet. But it seems to be protruding from the back by a little bit. The cabinet side is 15.5" and the shelf is 15.536". I know I'm missing something here, just don't know what?
Attachments
Pat Rice Nightstand.jpg
Pat Rice Nightstand.jpg (11.84 KiB) Viewed 827 times
Pat Rice Nightstand.hsf
(1.34 MiB) Downloaded 53 times
Sincerely,

Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com

User avatar
Damon Nabors
eCabinets Beta Tester
Posts: 923
Joined: Wed, Apr 05 2006, 5:50PM
Location: Marion, Ar.
Contact:

Re: Fixed shelf protruding from cabinet

Postby Damon Nabors » Tue, Jul 14 2009, 8:53PM

I noticed you also have a gap on the right side of the shelf, I went about it a little different than you, but I corrected that problem as well.
Hope this will help you
Attachments
Pat Rice Nightstand_a.hsf
(90.02 KiB) Downloaded 54 times
Damon Nabors

Donald Thomson
Guru Member
Posts: 666
Joined: Thu, May 14 2009, 11:41PM
Company Name: Diamond Lake Custom Woodworks
Location: Newport, WA
Contact:

Re: Fixed shelf protruding from cabinet

Postby Donald Thomson » Tue, Jul 14 2009, 11:26PM

Thank you Damon!

I'll take a look at how you approached it.
Sincerely,

Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com

Donald Thomson
Guru Member
Posts: 666
Joined: Thu, May 14 2009, 11:41PM
Company Name: Diamond Lake Custom Woodworks
Location: Newport, WA
Contact:

Re: Fixed shelf protruding from cabinet

Postby Donald Thomson » Thu, Jul 16 2009, 1:18PM

Hi Damon,

Thank you again for your help. When I try to load the cabinet I get an error dialog that says:

"The requested change resulted in an unworkable dimension for this cabinet. Press OK to restore previous settings"

When I click OK I get a cabinet that looks like the attached JPG file. Not sure what I'm doing wrong.
Attachments
Pat_Rice_Cabinet_a.jpg
Pat_Rice_Cabinet_a.jpg (30.17 KiB) Viewed 722 times
Sincerely,

Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: No registered users and 4 guests