Recent project cut on our CNC

Moderators: Jason Susnjara, Clint Buechlein

Post Reply
Jon Kenworthy
Junior Member
Posts: 43
Joined: Thu, Mar 27 2008, 6:00PM
Company Name: darrells Carpenter Shop
Location: Marana, AZ

Recent project cut on our CNC

Post by Jon Kenworthy »

Here is some pictures of one of our recent projects that was cut on our CS 40. It is a 16 ft. jon boat that was made for our own use. Another title could have been What Small Cabinet Shops Do When They Are Slow. It needs two more coats of paint and it should be ready to put in the water. We are planning on leaving the top rail the natural mahogany and painting the spray rail a dark blue and the rest of the boat a light gray. You can put a 15 horse motor on it.
Boat 2.jpg
Boat 2.jpg (26.1 KiB) Viewed 12615 times
Boat 1.jpg
Boat 1.jpg (27.05 KiB) Viewed 12615 times
Post Reply