Corner sinks

Moderators: Jason Susnjara, Clint Buechlein

Wally Schneeberger
Guru Member
Posts: 473
Joined: Tue, May 17 2005, 1:55PM

Corner sinks

Postby Wally Schneeberger » Tue, Mar 04 2008, 10:24AM

Does anyone have any sinks for a right angle corner cabinet? TIA
Image

JohnLashuay
Guru Member
Posts: 645
Joined: Mon, Nov 20 2006, 3:39PM
Company Name: Rylex Custom Cabinetry-Close
Country: UNITED STATES
Location: Pine Island, New York
Contact:

Re: Corner sinks

Postby JohnLashuay » Thu, Mar 13 2008, 7:57AM

Wally,

Here is a corner sink cabinet I just recently used for a kitchen design.

The counter top is just a top shelf that I made "top flush" in the construction settings, then I made a cut-out for the sink in the part editor.

Hope this helps!

John
Rylex Custom Cabinetry & Closets
http://www.rylexonline.com
Thermwood CS 43

Wally Schneeberger
Guru Member
Posts: 473
Joined: Tue, May 17 2005, 1:55PM

Re: Corner sinks

Postby Wally Schneeberger » Thu, Mar 13 2008, 8:50AM

Thanks John. I have one that I have done like that too. I am looking for the actual corner sink that fits in a 90 deg corner cabinet. I have seen them in pics but not here.
Image

JohnLashuay
Guru Member
Posts: 645
Joined: Mon, Nov 20 2006, 3:39PM
Company Name: Rylex Custom Cabinetry-Close
Country: UNITED STATES
Location: Pine Island, New York
Contact:

Re: Corner sinks

Postby JohnLashuay » Thu, Mar 13 2008, 9:54AM

Wally,

This corner cabinet sink is all I have. I'll keep a look out.

Good Luck!

John
Rylex Custom Cabinetry & Closets
http://www.rylexonline.com
Thermwood CS 43

User avatar
George Davidson
eCabinets Beta Tester
Posts: 1585
Joined: Tue, May 17 2005, 1:16PM
Location: Norwood Pa.

Re: Corner sinks

Postby George Davidson » Thu, Mar 13 2008, 7:00PM

Hi Wally
Would this help :?:
Attachments
Sink_Corner Sinks.zip
(9.25 KiB) Downloaded 195 times
Sink Corner.jpg
Sink Corner.jpg (26.62 KiB) Viewed 3003 times

Wally Schneeberger
Guru Member
Posts: 473
Joined: Tue, May 17 2005, 1:55PM

Re: Corner sinks

Postby Wally Schneeberger » Thu, Mar 13 2008, 9:05PM

Thanks George ... that's exactly what I am looking for. Now I just have to find a supplier .. here!!!
Image

User avatar
George Davidson
eCabinets Beta Tester
Posts: 1585
Joined: Tue, May 17 2005, 1:16PM
Location: Norwood Pa.

Re: Corner sinks

Postby George Davidson » Thu, Mar 13 2008, 9:25PM


User avatar
Jean G Voyer
Guru Member
Posts: 527
Joined: Tue, May 17 2005, 1:38PM
Company Name: Janot Interiors Ltd
Location: Calgary, Alberta, Canada
Contact:

Re: Corner sinks

Postby Jean G Voyer » Thu, Mar 13 2008, 9:50PM

Wally,

Kindred has one. The # is QCR/8. You will find it at most of the wholesalers but you might have to go through a plumber to get it.
You can go on the Kindred site and download their catalogue.
Hope this help.
Jean-Gabriel Voyer
Janot Interiors Ltd
www.customcabinetscalgary.com
Dell Precision PWS490, Intel Xeon CPU,3.00 GB Ram, Window XP Pro, Quadro Fx 3500

Wally Schneeberger
Guru Member
Posts: 473
Joined: Tue, May 17 2005, 1:55PM

Re: Corner sinks

Postby Wally Schneeberger » Thu, Mar 13 2008, 10:47PM

Thanks Jean -- I usually order through Richelieu but they don't have a corner sink. I think that I will check with Woesly to see if they have it or can order it. Where about are you in Calgary? Have you ever dealt with Calmark? They are changing hands but I don't think much will change.
Image

User avatar
Jean G Voyer
Guru Member
Posts: 527
Joined: Tue, May 17 2005, 1:38PM
Company Name: Janot Interiors Ltd
Location: Calgary, Alberta, Canada
Contact:

Re: Corner sinks

Postby Jean G Voyer » Fri, Mar 14 2008, 3:51AM

Wally,

My shop is close to the Chinook center.
No I do not deal with Calmark. I don't know who they are. I use to deal a lot in plumbing years ago when I had another business.
But now with this business I am busy enough that I can afford to concentrate only on cabinetry.
I don't know about you, I have seen some of your work on this site and you seem to be doing very good that you must be very busy too.
Where about are you? Have you been participating in training with CNC Automation?
Send me an email. We should meet and have coffee some times.
Jean-Gabriel Voyer
Janot Interiors Ltd
www.customcabinetscalgary.com
Dell Precision PWS490, Intel Xeon CPU,3.00 GB Ram, Window XP Pro, Quadro Fx 3500

User avatar
Jean G Voyer
Guru Member
Posts: 527
Joined: Tue, May 17 2005, 1:38PM
Company Name: Janot Interiors Ltd
Location: Calgary, Alberta, Canada
Contact:

Re: Corner sinks

Postby Jean G Voyer » Fri, Mar 14 2008, 4:04AM

Sorry Wally,
I did a search and now I know who Calmark is. They got in touch with me a couple years back when Rob got is CNC and was looking for clients who needed outsourcing. I might have been in touch with him a couple times since then but because of the ever changing requirements of my production I never been able to look seriously in outsourcing.
I even consider right now buying my own CNC. Maybe I shouldn't because my memory doesn't seem that good any more. :lol:
Must be the age.
Jean-Gabriel Voyer
Janot Interiors Ltd
www.customcabinetscalgary.com
Dell Precision PWS490, Intel Xeon CPU,3.00 GB Ram, Window XP Pro, Quadro Fx 3500


Return to “Customer 3D Files”

Who is online

Users browsing this forum: No registered users and 1 guest