CAM Solution..........!

Discuss Thermwood 5-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Clint Buechlein, Jim Bullis

Mohammed riyas
New Member
Posts: 8
Joined: Sun, Jan 01 2012, 3:38AM
Company Name: ARTIC
Country: SAUDI ARABIA
Location: riyadh
Contact:

CAM Solution..........!

Postby Mohammed riyas » Wed, Sep 19 2012, 9:21AM

Dear's,

Can any one help us...... :!:

Currently we are using Artcam for 3-axis Machining. we decided to buy a New CAM software for 5-axis Machining
But we struggling with Brands, either Master cam or Power Mill.

Plz suggest the best solution for us in order to suits with all aspects. :|

Joe Harger

Re: CAM Solution..........!

Postby Joe Harger » Thu, Sep 20 2012, 8:35AM

Although just about any of the big CAM companies can provide you with a good solution eventually, here at Thermwood we use Mastercam and our posts work seamlessly with our CNC routers. This is a big plus to
think about using Mastercam as we know the software and can make sure it works with our posts and your machine so you experience very little problems while learning and integrating the software to your machine. This cant be said for sure if you purchase the software/post from a different vendor.

Joe Harger
Software Support
Thermwood Corporation

Matt Quarles
New Member
Posts: 18
Joined: Thu, Oct 05 2006, 10:39AM

Re: CAM Solution..........!

Postby Matt Quarles » Fri, Apr 12 2013, 12:41PM

using mastercam here also


Return to “Thermwood 5-Axis Machinery”

Who is online

Users browsing this forum: No registered users and 3 guests