Tramming of 5-Axis Model 67

Discuss Thermwood 5-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Clint Buechlein, Jim Bullis

Post Reply
Rayno von Schlicht
New Member
Posts: 6
Joined: Fri, Aug 11 2017, 12:16PM
Company Name: Rind Routing Services
Country: SOUTH AFRICA
Contact:

Tramming of 5-Axis Model 67

Post by Rayno von Schlicht »

Morning All,

I am needing to assist a customer to tram (re-align) the head on his Model 67.

Can anyone perhaps share the PDF walk-through that is on the Model 67 for tramming the head.

My client doesn't seem to have the correct PDF on his Model 67 control.

Any tips on how to perform this with the least hassle will be welcome as well!
Thanks!
Dennis Palmer
Thermwood Team
Posts: 818
Joined: Tue, May 17 2005, 1:32PM
Company Name: Thermwood Corporation
Country: UNITED STATES
Location: Thermwood

Re: Tramming of 5-Axis Model 67

Post by Dennis Palmer »

Hello Rayno,

I was notified that you had received the information requested soon after your initial post. I assume all is good, since generally, no news is good news.

All the best!
Post Reply