Applying ML Cambell Toner

Off-topic discussion that doesn't pertain to the other forums.

Moderator: Jason Susnjara

Post Reply
Gary Puckett
Wizard Member
Posts: 1324
Joined: Mon, May 19 2008, 1:39PM
Company Name: The Woodworkery
Location: Saint Charles, Missouri
Contact:

Applying ML Cambell Toner

Post by Gary Puckett »

When you spray ML Cambell toner do you mix it with the top coat and then apply it ?

Thanks
Gary
HP Pavilion
Vista home Premium 64bit S. pack 2
AMD Phenom-X4
9850 Quad-Core Processor
6.0GB/Go Memory
1 TB/To Hard Drive
Nividia GeForce 9800 GT
Rick Palechuk
Wizard Member
Posts: 1896
Joined: Wed, May 18 2005, 7:54PM
Company Name: Milltech Millworks Ltd.
Country: CANADA
Location: Edmonton, Alberta
Contact:

Re: Applying ML Cambell Toner

Post by Rick Palechuk »

Gary, thats the way we have done it. We mix a little color with the clear, keeping a record of all the steps and amounts, then we use a small gravity feed gun to apply it.
Gary Puckett
Wizard Member
Posts: 1324
Joined: Mon, May 19 2008, 1:39PM
Company Name: The Woodworkery
Location: Saint Charles, Missouri
Contact:

Re: Applying ML Cambell Toner

Post by Gary Puckett »

Rick,

I was talking to another guy on wood web and he suggested mixing the toner with the vinyl sealer at a thinned down mixture then apply the top coat.

Gary
HP Pavilion
Vista home Premium 64bit S. pack 2
AMD Phenom-X4
9850 Quad-Core Processor
6.0GB/Go Memory
1 TB/To Hard Drive
Nividia GeForce 9800 GT
Wally Schneeberger
Guru Member
Posts: 477
Joined: Tue, May 17 2005, 1:55PM

Re: Applying ML Cambell Toner

Post by Wally Schneeberger »

Gary Puckett wrote:Rick,

I was talking to another guy on wood web and he suggested mixing the toner with the vinyl sealer at a thinned down mixture then apply the top coat.

Gary
Either way would work just fine. You might even gain a little depth by adding to the sealer.
Rick Palechuk
Wizard Member
Posts: 1896
Joined: Wed, May 18 2005, 7:54PM
Company Name: Milltech Millworks Ltd.
Country: CANADA
Location: Edmonton, Alberta
Contact:

Re: Applying ML Cambell Toner

Post by Rick Palechuk »

We don't use a separate sealer. We use Krystal, which is a self sealing topcoat.
Michael S Murray
eCabinets Beta Tester
Posts: 933
Joined: Tue, May 17 2005, 2:48PM
Location: Logansport, In
Contact:

Re: Applying ML Cambell Toner

Post by Michael S Murray »

We always put a clear cote over the toner coat
Mike Murray
Versatile Cabinet & Solid Surface
mike@versatilecabinet.com
http://www.versatilecabinet.com
Post Reply