6 in Fluted column

Moderators: Jason Susnjara, Clint Buechlein

Greg Smith
eCabinets Beta Tester
Posts: 121
Joined: Mon, May 09 2005, 9:38PM
Location: Novar, Ontario, Canada

6 in Fluted column

Postby Greg Smith » Wed, Apr 12 2006, 3:32PM

In case anyone has a need for this.

6\" square to start, .25 offset and -6.25\" plunge
flip and repeat for full column
Attachments
fluted column.jpg
fluted column.jpg (35.88 KiB) Viewed 5386 times
6in fluted column.tol
(11.15 KiB) Downloaded 514 times

Al dedenus
Guru Member
Posts: 267
Joined: Sun, Apr 29 2007, 8:53PM
Company Name: Creative Kitchens and Interior
Country: NEW ZEALAND
Location: Tauranga New Zealand

Re: 6 in Fluted column

Postby Al dedenus » Thu, Jul 17 2008, 2:25AM

How do you flip it to do the other side???? :wall:

Greg Smith
eCabinets Beta Tester
Posts: 121
Joined: Mon, May 09 2005, 9:38PM
Location: Novar, Ontario, Canada

Re: 6 in Fluted column

Postby Greg Smith » Thu, Jul 17 2008, 7:04AM

Its been a while so I had to go and try it and see what I did. The trick is where you click on the part when making the profile cut. Click on the lower left side for the first cut and then the upper part of the right side for the second cut, and it should work for you. Where you click is the start of the cut so you can change the direction of travel by changing the start. Hope it helps.
Intel Core i5 3.47GHz, 8 gig RAM, Quadro FX 1800, Win 7 x64

Al dedenus
Guru Member
Posts: 267
Joined: Sun, Apr 29 2007, 8:53PM
Company Name: Creative Kitchens and Interior
Country: NEW ZEALAND
Location: Tauranga New Zealand

Re: 6 in Fluted column

Postby Al dedenus » Thu, Jul 17 2008, 8:48PM

Thanks Greg worked a treat :D


Return to “Customer Tools”

Who is online

Users browsing this forum: No registered users and 2 guests