template gadget

Moderators: Jason Susnjara, Clint Buechlein

John Powell
Senior Member
Posts: 114
Joined: Thu, Dec 29 2005, 3:14AM
Location: Perth Western Australia

template gadget

Postby John Powell » Sat, Mar 29 2008, 11:11PM

G,day from oz.
Sorry this is not realy an ecabs subject but the tool i am looking for would be of interest to any kitchen or built in furniture
makers. My wife saw this being used on "This old house". It was some kind of laser gadget that recorded dimentions and
iregularities in the shape of a room then sent this information, by email back to the workshop where counter top templates
were then made. I havnt been able to find any info on this tool anyware. I have looked on the TOH wbsite with no result.
Just wondered if any ecab users knew of sutch a tool. thanks.
John.
Nearly is not enough

Wally Schneeberger
Guru Member
Posts: 473
Joined: Tue, May 17 2005, 1:55PM

Re: template gadget

Postby Wally Schneeberger » Sun, Mar 30 2008, 9:08AM

Image

David Egnoski
Senior Member
Posts: 183
Joined: Tue, May 17 2005, 1:05PM
Company Name: Richmond Cabinet
Country: UNITED STATES
Location: Delavan, WI

Re: template gadget

Postby David Egnoski » Wed, Apr 09 2008, 5:00PM

Here's another one that is getting alot of press.

http://www.etemplatesystem.com/
Dave Egnoski
Richmond Cabinet & Millwork

craig huzway
New Member
Posts: 8
Joined: Thu, Apr 03 2008, 1:01PM

Re: template gadget

Postby craig huzway » Thu, Jul 16 2009, 5:06PM

you should call the counter top shop from the show.
Counter Intelligence Inc. they are in silver spring Md
the most annoying ads on our TV these days.
don't use my name. burned that bridge long ago...

COUNTER INTELLIGENCE
8951-B Brookville Road
Silver Spring, MD 20910
Tel: (301) 589-5321
Fax: (301) 589-2115

Keith Neal
Junior Member
Posts: 49
Joined: Tue, Mar 03 2009, 9:30AM
Company Name: Wilbedone Inc.
Location: Cortland,NY(upstate)USA
Contact:

Re: template gadget

Postby Keith Neal » Wed, Jul 29 2009, 11:10AM

Our company uses them all the time for our countertops,they are one of the best tools for accurately recording wall scribe.Before we used the lasers we were constantly having to scribe our tops in the field(often in the customers driveway with a belt sander.)having to bring them in and out of the house (or commercial site)so we wouldn't make a mess of the customers kitchen.Now we lase the cabinets and wall before fabrication,add overhangs,cutouts,ect in cad transfer them to our thermwood,cut and go! Much more accurate and alot less callbacks,although we have a templater who templates everything by hand and make by far the most accurate templates I've seen.


Return to “Customer Tools”

Who is online

Users browsing this forum: No registered users and 2 guests