Just wanted to post a few pics of a modification we made to decrease dust left on the table. We added 2 tubes inside the shroud which blows a constant stream of air. Chips not an issue but when we cut mdf, it definitely gets the dust up so the vacuum can do a better job. Little to no dust left on table after.
Just wanted to share
Increased dust pick up - DIY modifcation
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis
-
- Junior Member
- Posts: 76
- Joined: Fri, Feb 15 2013, 5:21PM
- Company Name: Millworx
- Country: CANADA
-
- Junior Member
- Posts: 76
- Joined: Fri, Feb 15 2013, 5:21PM
- Company Name: Millworx
- Country: CANADA
-
- Senior Member
- Posts: 160
- Joined: Fri, Apr 10 2015, 7:57AM
- Company Name: Bergman Custom Casework LLC
- Country: UNITED STATES
Re: Increased dust pick up - DIY modifcation
I love seeing the improvements folks make to these shrouds/boots. I'm still trying to figure out how to get a 6" riser to work with the spindle head in our setup. The 4" riser provided with the stock machine works, but severely inhibits the CFM we have from our DC to the THM.
_____________
Win 10 Pro 64 bit on MSI Z390M Pro4
Intel core i7 9700KF 3.6GHz (OC 4.2Ghz)
32 gig RAM, NVIDIA GeForce GTX 1050 Ti
NVME SSM2HD 1TB NTFS
Win 10 Pro 64 bit on MSI Z390M Pro4
Intel core i7 9700KF 3.6GHz (OC 4.2Ghz)
32 gig RAM, NVIDIA GeForce GTX 1050 Ti
NVME SSM2HD 1TB NTFS
-
- Junior Member
- Posts: 26
- Joined: Thu, Jan 02 2014, 5:46PM
- Company Name: Northwest Kitchen Centre
- Country: CANADA
Re: Increased dust pick up - DIY modifcation
this is on cs 43?