Default Flycut Values

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Rich Kasten

Tommy Wieler
Junior Member
Posts: 79
Joined: Fri, Sep 22 2017, 7:49AM
Company Name: Silverpine Cabinets
Country: CANADA

Default Flycut Values

Postby Tommy Wieler » Thu, Jun 04 2020, 1:46PM

I was just wondering if there is a way to change the default amount that gets removed from the wasteboard during a flycut?

Clint Buechlein
Thermwood Team
Posts: 477
Joined: Fri, May 15 2015, 1:21PM
Company Name: Thermwood Corp
Country: UNITED STATES

Re: Default Flycut Values

Postby Clint Buechlein » Mon, Jun 08 2020, 11:04AM

Unfortunately there is not, I've put in a request with the software engineers for it though.

-Clint-

Tommy Wieler
Junior Member
Posts: 79
Joined: Fri, Sep 22 2017, 7:49AM
Company Name: Silverpine Cabinets
Country: CANADA

Re: Default Flycut Values

Postby Tommy Wieler » Mon, Jun 08 2020, 12:44PM

Thanks Clint. I know we're a little odd cause we use metric by default in our shop, so I would like to get a nice round number for the flycut, like 0.3mm instead of 0.254mm.

Clint Buechlein
Thermwood Team
Posts: 477
Joined: Fri, May 15 2015, 1:21PM
Company Name: Thermwood Corp
Country: UNITED STATES

Re: Default Flycut Values

Postby Clint Buechlein » Tue, Jun 09 2020, 9:27AM

Tommy,

I should have something that will work for you. I need your thm.ini located in C:\system. You can either post it here in a zipped folder or email it to cabinets@thermwood.com

-Clint-

Tommy Wieler
Junior Member
Posts: 79
Joined: Fri, Sep 22 2017, 7:49AM
Company Name: Silverpine Cabinets
Country: CANADA

Re: Default Flycut Values

Postby Tommy Wieler » Mon, Jun 22 2020, 9:20AM

Sorry I've been away from the shop for a couple weeks. Here's the file, looking forward to what you've got for me!
Thanks Clint!
Attachments
THM.zip
(931 Bytes) Downloaded 10 times

Clint Buechlein
Thermwood Team
Posts: 477
Joined: Fri, May 15 2015, 1:21PM
Company Name: Thermwood Corp
Country: UNITED STATES

Re: Default Flycut Values

Postby Clint Buechlein » Tue, Jun 23 2020, 8:11AM

Tommy,

Updated file attached. Make sure THM is shut down before you paste it back in.

-Clint-
Attachments
THM.zip
(946 Bytes) Downloaded 11 times

Tommy Wieler
Junior Member
Posts: 79
Joined: Fri, Sep 22 2017, 7:49AM
Company Name: Silverpine Cabinets
Country: CANADA

Re: Default Flycut Values

Postby Tommy Wieler » Tue, Jun 23 2020, 8:45AM

Thanks a lot Cliff! Exactly what I wanted...
Have a great day!


Return to “Thermwood 3-Axis Machinery”

Who is online

Users browsing this forum: Google [Bot] and 5 guests