Hello,
I'm getting a strange result when I cut the pocket in the frame handle for this job. Anyone have any ideas?
Thanks
Problem cutting pocket
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis
-
- Junior Member
- Posts: 54
- Joined: Sun, Aug 28 2005, 6:22AM
- Location: Ireland
-
- eCabinets Beta Tester
- Posts: 1263
- Joined: Wed, Jul 01 2009, 2:19PM
- Company Name: Halls Edge Inc
- Country: UNITED STATES
- Location: Stamford, CT USA
- Contact:
Re: Problem cutting pocket
Sean
did you forget to attach the job? or I'm just no seeing it....?
jnr
did you forget to attach the job? or I'm just no seeing it....?
jnr
Josh Rayburn
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
Re: Problem cutting pocket
Sean,
I did receive your email to my Thermwood account, however the following will also be needed in addition to the CNC file you sent me:
1.) Control Nesting EXPORT file
2.) Design file from eCabinet systems (ie: .hsf, .esa, or .esj)
Thanks!
I did receive your email to my Thermwood account, however the following will also be needed in addition to the CNC file you sent me:
1.) Control Nesting EXPORT file
2.) Design file from eCabinet systems (ie: .hsf, .esa, or .esj)
Thanks!
Re: Problem cutting pocket
Sean,
I've found that changing the Tolerance in SETTINGS, to a value of .0001 from .001 causes the correct pocket geom. to cut. The affects of tolerance change can also be monitored by zooming in on each end of the large pocket in the NESTING screen.
This scenario will be under further review here, as I know in the past the tolerance setting could potentially affect whether or not a pocket would cut, however, it wouldn’t affect the actual cut shape as seen in this case.
Thanks for the info.
I've found that changing the Tolerance in SETTINGS, to a value of .0001 from .001 causes the correct pocket geom. to cut. The affects of tolerance change can also be monitored by zooming in on each end of the large pocket in the NESTING screen.
This scenario will be under further review here, as I know in the past the tolerance setting could potentially affect whether or not a pocket would cut, however, it wouldn’t affect the actual cut shape as seen in this case.
Thanks for the info.
-
- Junior Member
- Posts: 54
- Joined: Sun, Aug 28 2005, 6:22AM
- Location: Ireland