T shaped pocket help

[mohan kommineni]

Hello all
we are trying to cut a new display base and having issu on the t shaped pocket it does every thing correct except the t shape (only does the vertical line of t but dosent do the horizontal line to finish the t shape) can any one had this issue before all the tools are setup and ready can any one try to run this and check for me thanks

i had a similar issue viewtopic.php?f=7&t=11792 in the past where we had a hole and a rectangular pocket on the top of each other and the machine doesnt do the rectangular pocket and i was told by THM Tech that it is in the list to fix in future. looks like Tech are too busy to handle silly issues.

Thanks to one and all

[Ryan Hochgesang]

Hi Mohan,

To enable a more detailed review of your issue, we would also need to see your Control Nesting settings (EXPORT file).

Thanks!

[mohan kommineni]

hello all here is the file

[Ryan Hochgesang]

Mohan,

The t slot.esj file that I've downloaded does not contain information that I can view. In order for another user to view design within a .esj file, individual who has created file must have generated drawing in room layout or created a batch. The other option is to have saved the design file in the cabinet editor as a .esa ( assembly ) or .hsf ( cabinet ) file. I've tried renaming your file with all the different extensions, but still do not see design your questioning.

[mohan kommineni]

hello all
please find the new file attached even the previous file was saved in the batch stage but must be software glitch anyway iam uploading again please try now

[Daniel Vonderheide]

I was able to change some settings and get the file to nest and write the cnc with the T pocket. The first thing I did was to check ignore groups in the tooling section. Your material you created the part out of is set for group 2 and it does not have a small enough tool to cut the pocket. The default group does. The second change was in the settings area. I changed the pocket area through cuts to 10322.56mm. This allowed the machine to recognize the whole t shape and pocket it completely. Hope this helps.

[mohan kommineni]

Hello Daniel

thanks for your help [ we will note the settings]