Top to Stretch - Dado cut on wrong side
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis
-
- Guru Member
- Posts: 645
- Joined: Mon, Nov 20 2006, 3:39PM
- Company Name: Rylex Custom Cabinetry-Close
- Country: UNITED STATES
- Location: Pine Island, New York
- Contact:
Top to Stretch - Dado cut on wrong side
Hi guys,
Here are 2 cabinets that looked good up until they were cut. In both situations the TOP had s stretch blind dado'd to it. When cut, the dado was on the opposite side than what it should have been.
Can someone take a look at these for me?
Thanks, John!
Here are 2 cabinets that looked good up until they were cut. In both situations the TOP had s stretch blind dado'd to it. When cut, the dado was on the opposite side than what it should have been.
Can someone take a look at these for me?
Thanks, John!
- Attachments
-
- Montfort--Vanity.hsf
- (876.02 KiB) Downloaded 360 times
-
- Guru Member
- Posts: 645
- Joined: Mon, Nov 20 2006, 3:39PM
- Company Name: Rylex Custom Cabinetry-Close
- Country: UNITED STATES
- Location: Pine Island, New York
- Contact:
Re: Top to Stretch - Dado cut on wrong side
Here is the second cabinet.
- Attachments
-
- Bangle Pull Out.hsf
- (1.09 MiB) Downloaded 331 times
-
- eCabinets Beta Tester
- Posts: 1263
- Joined: Wed, Jul 01 2009, 2:19PM
- Company Name: Halls Edge Inc
- Country: UNITED STATES
- Location: Stamford, CT USA
- Contact:
Re: Top to Stretch - Dado cut on wrong side
Looked.....can't find a probelm?
I have not written any code for it to reverse plot and see what happens though....
maybe this afternoon I'll have a chance to look further into it...
jnr
I have not written any code for it to reverse plot and see what happens though....
maybe this afternoon I'll have a chance to look further into it...
jnr
Josh Rayburn
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
-
- Guru Member
- Posts: 645
- Joined: Mon, Nov 20 2006, 3:39PM
- Company Name: Rylex Custom Cabinetry-Close
- Country: UNITED STATES
- Location: Pine Island, New York
- Contact:
Re: Top to Stretch - Dado cut on wrong side
Thanks Josh! Everything looked normal until we cut it. Interesting that it happened on 2 different cabinets involving a Top to Stretcher blind dado construction.
-
- eCabinets Beta Tester
- Posts: 1263
- Joined: Wed, Jul 01 2009, 2:19PM
- Company Name: Halls Edge Inc
- Country: UNITED STATES
- Location: Stamford, CT USA
- Contact:
Re: Top to Stretch - Dado cut on wrong side
Yep it's a strange one indeed.
Hope TWD can shed some light on it, and I also hope it doesn't bite me anytime soon...there are just too many things that need fixing in this software right now; the broken list just keeps getting longer and longer!!
Hope TWD can shed some light on it, and I also hope it doesn't bite me anytime soon...there are just too many things that need fixing in this software right now; the broken list just keeps getting longer and longer!!
Josh Rayburn
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
-
- Guru Member
- Posts: 645
- Joined: Mon, Nov 20 2006, 3:39PM
- Company Name: Rylex Custom Cabinetry-Close
- Country: UNITED STATES
- Location: Pine Island, New York
- Contact:
Re: Top to Stretch - Dado cut on wrong side
Thanks Josh!
-
- Guru Member
- Posts: 341
- Joined: Sat, Mar 10 2007, 7:31PM
- Company Name: Top Notch Cabinets
- Country: CANADA
- Location: Oakville, Ontario
- Contact:
Re: Top to Stretch - Dado cut on wrong side
I reported something like that in the beta forum. Scott knows about it and mentioned it's going to be fixed in the next release. Mine was a full dado that looked good in eCabinets but was cut on the opposite side on the machine
Top Notch Cabinets
http://www.topnotchcabinets.com/
http://www.topnotchcabinets.com/
-
- Guru Member
- Posts: 645
- Joined: Mon, Nov 20 2006, 3:39PM
- Company Name: Rylex Custom Cabinetry-Close
- Country: UNITED STATES
- Location: Pine Island, New York
- Contact:
Re: Top to Stretch - Dado cut on wrong side
Thanks Georgi! Good to hear!!
-
- New Member
- Posts: 16
- Joined: Thu, Apr 14 2011, 11:04AM
- Company Name: Central City Millworks
- Country: UNITED STATES
Re: Top to Stretch - Dado cut on wrong side
I also had similar problem with a deck dadoing into a partition rather than an end. Part looked great in Ecab, but dado was put on wrong side of partition in control nesting. I think adjusting the thickness of the material is what confused the software, because when i sent it out as is without changing thickness i had no problem. Sorry you're having this issue, but I feel better knowing maybe its more than just my incompetence with Ecabinets !