Hey Hows it going?
We've just had the auto lube hose break on the x axis and its getting fixed today, can i still run it with out the auto lube? just for like a few sheets not all day!
Cheers
Thom Davies
Auto Lube Hose Broken
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis
-
- Guru Member
- Posts: 530
- Joined: Tue, May 17 2005, 6:44PM
- Company Name: Dawn Group
- Country: NEW ZEALAND
- Location: Christchurch New Zealand
-
- Thermwood Team
- Posts: 361
- Joined: Wed, May 17 2006, 11:25AM
- Location: Thermwood
Re: Auto Lube Hose Broken
Having a broken auto lube line will not keep the machine from running but you will have to remember that none of the bearings are getting oil at that time. All of it is going out through the broken line. I would pinch it off so that the other bearings are getting the oil and then replace it as soon as possible...
-
- Senior Member
- Posts: 167
- Joined: Tue, Oct 03 2006, 6:51PM
- Location: Phoenix, AZ
- Contact:
Re: Auto Lube Hose Broken
Thom,
We had that happen here and ran a couple days before getting repaired. I just had the guys drip a little oil on the screws and such twice a day until we got repaired. No issues here. Didn't think to pinch/plug the hole.
Fred
We had that happen here and ran a couple days before getting repaired. I just had the guys drip a little oil on the screws and such twice a day until we got repaired. No issues here. Didn't think to pinch/plug the hole.
Fred
Fred Hirsch
-
- Guru Member
- Posts: 530
- Joined: Tue, May 17 2005, 6:44PM
- Company Name: Dawn Group
- Country: NEW ZEALAND
- Location: Christchurch New Zealand
Re: Auto Lube Hose Broken
We got it sorted the next day, and its as good as new! Not bad for a 6 y/o machine thats gone threw 2 major quakes!