Odd KD on Flip Opps

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Rich Kasten

JohnLashuay
Guru Member
Posts: 645
Joined: Mon, Nov 20 2006, 3:39PM
Company Name: Rylex Custom Cabinetry-Close
Country: UNITED STATES
Location: Pine Island, New York
Contact:

Odd KD on Flip Opps

Postby JohnLashuay » Wed, Mar 28 2012, 3:57PM

This just started happening since I uploaded CN 5-59a. On the back side of every sheet that has flip ops, a random KD hole is cut. Not sure why.
I am attaching the export file and cnc file. Any more info, please let me know.

-John
Attachments
Odd KD.zip
(277.61 KiB) Downloaded 60 times
Rylex Custom Cabinetry & Closets
http://www.rylexonline.com
Thermwood CS 43

Daniel Vonderheide
Thermwood Team
Posts: 358
Joined: Wed, May 17 2006, 11:25AM
Location: Thermwood

Re: Odd KD on Flip Opps

Postby Daniel Vonderheide » Thu, Mar 29 2012, 7:27AM

Your export file does not have the same twd file loaded that created the CNC file. Please email me the twd file and the job file from ecabinets to program@thermwood.com. Also, if you are using the newer version of ecabinets, v6.0 build 8, you will need to download the 5.59 patch from the website.

JohnLashuay
Guru Member
Posts: 645
Joined: Mon, Nov 20 2006, 3:39PM
Company Name: Rylex Custom Cabinetry-Close
Country: UNITED STATES
Location: Pine Island, New York
Contact:

Re: Odd KD on Flip Opps

Postby JohnLashuay » Thu, Mar 29 2012, 8:05AM

Daniel, I looked at the latest CN update (CN5-70) and it looks like it addresses the issue we were having. I'll load it and let you know if the problem still persists.
-John
Rylex Custom Cabinetry & Closets
http://www.rylexonline.com
Thermwood CS 43

JohnLashuay
Guru Member
Posts: 645
Joined: Mon, Nov 20 2006, 3:39PM
Company Name: Rylex Custom Cabinetry-Close
Country: UNITED STATES
Location: Pine Island, New York
Contact:

Re: Odd KD on Flip Opps

Postby JohnLashuay » Fri, Mar 30 2012, 2:07PM

It looks like the latest update fixed the problem. We haven't seen it since!! :D :D
-John
Rylex Custom Cabinetry & Closets
http://www.rylexonline.com
Thermwood CS 43

Steve Unruh
New Member
Posts: 15
Joined: Sat, Sep 12 2009, 9:39PM
Company Name: Oak Tree Cabinetry

Re: Odd KD on Flip Opps

Postby Steve Unruh » Wed, Apr 04 2012, 8:41AM

John, we found the same problem - had a custom cut out job for a customer and was just fixing to recut a piece that had a random dado cut on the wrong side of a top. Just downloaded CN 5.70 to install to fix the error. Talk about timely! Glad I read the forum first thing this morning. Glad to know you're cutting parts!

Steve
Oak Tree Cabinetry
Chickasha, Ok
Thermwood CS 43

JohnLashuay
Guru Member
Posts: 645
Joined: Mon, Nov 20 2006, 3:39PM
Company Name: Rylex Custom Cabinetry-Close
Country: UNITED STATES
Location: Pine Island, New York
Contact:

Re: Odd KD on Flip Opps

Postby JohnLashuay » Thu, Apr 05 2012, 7:41AM

Hi Steve, "timing is everything!" Good to hear!
-John
Rylex Custom Cabinetry & Closets
http://www.rylexonline.com
Thermwood CS 43


Return to “Thermwood 3-Axis Machinery”

Who is online

Users browsing this forum: No registered users and 8 guests