I'm in the process of trying to get our push bar working but it seems the vaccum is not deactivating like it should in order for the sheet to be pushed off. I read somewhere that possibly the air doesn't shut off completely but just regulates it enough for the sheet to be pushed off? I know the tech told me that there may be a setting in controlled nesting to activate that but the problem is we are not using controlled nesting. Is it possibly a code i need to put into our programming? Any tips or advice on this topic would be much appreciated.
Thanks - Matthew
MTR - Push Bar
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis
-
Matthew K Boulton
- New Member
- Posts: 1
- Joined: Thu, Apr 05 2012, 6:34AM
- Company Name: GCW Custom Kitchens
- Country: CANADA
-
Brad McIntosh
- Guru Member
- Posts: 559
- Joined: Wed, May 18 2005, 6:59PM
- Company Name: CNC Automation
- Country: CANADA
- Location: St. Zotique, Québec, Canada
- Contact:
Re: MTR - Push Bar
Matthew,
Are you refering to output from your Cabinet Vision product? If so, we had been working with Planit Canada on their integration with your MTR and I believe that that was all resolved and working. If not, then Planit Canada and CNC Automation should be contacted.
If it another product creating output for your machine, please contact us directly yourself or have John give us a call or drop us an email.
Are you refering to output from your Cabinet Vision product? If so, we had been working with Planit Canada on their integration with your MTR and I believe that that was all resolved and working. If not, then Planit Canada and CNC Automation should be contacted.
If it another product creating output for your machine, please contact us directly yourself or have John give us a call or drop us an email.