A word of caution.
I ran two jobs yesterday where my customer used the new "Edit Material A Side" feature. For both jobs there is a row of shelf pin holes along the top of the second sheet near the right edge. On the third sheet there is one odd hole in the far upper right corner. None of these holes seem to be related to the jobs and the holes are in the same place in both jobs. In the first job the holes where in the waste. In the second job, they where in a part that shouldn't have had any holes.
I've sent the related files to Thermwood so they can troubleshoot.
Edit Material A Side problem
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis
-
- Senior Member
- Posts: 209
- Joined: Tue, May 17 2005, 1:05PM
- Company Name: Richmond Cabinet
- Country: UNITED STATES
- Location: Delavan, WI
Edit Material A Side problem
Dave Egnoski
Richmond Cabinet & Millwork
Richmond Cabinet & Millwork
-
- Thermwood Team
- Posts: 361
- Joined: Wed, May 17 2006, 11:25AM
- Location: Thermwood
Re: Edit Material A Side problem
We have recieved the files and I have confirmed the issue. I have informed the software engineers. Thank you.
-
- eCabinets Beta Tester
- Posts: 1263
- Joined: Wed, Jul 01 2009, 2:19PM
- Company Name: Halls Edge Inc
- Country: UNITED STATES
- Location: Stamford, CT USA
- Contact:
Re: Edit Material A Side problem
Can you share your findings with us minions so we can avoid the issue whenever possible?
jnr
jnr
Josh Rayburn
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
-
- Thermwood Team
- Posts: 361
- Joined: Wed, May 17 2006, 11:25AM
- Location: Thermwood
Re: Edit Material A Side problem
All I did was verify that his issue was valid and not a settings issue. I do not know what the cause is. The software engineers have to figure that out. Once I know more, I will let you know.
-
- eCabinets Beta Tester
- Posts: 1263
- Joined: Wed, Jul 01 2009, 2:19PM
- Company Name: Halls Edge Inc
- Country: UNITED STATES
- Location: Stamford, CT USA
- Contact:
Re: Edit Material A Side problem
Thanks Daniel!
jnr
jnr
Josh Rayburn
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
-
- Thermwood Team
- Posts: 361
- Joined: Wed, May 17 2006, 11:25AM
- Location: Thermwood
Re: Edit Material A Side problem
I have been informed that this issue has been found and will be corrected in the next release of Control Nesting. Unfortunately, I do not know when it will be released.