91000 DXF file has no depth

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Rich Kasten

Andrew Kolibas
New Member
Posts: 1
Joined: Tue, Oct 02 2012, 5:35PM
Company Name: AA Computer repair

91000 DXF file has no depth

Postby Andrew Kolibas » Tue, Oct 02 2012, 6:24PM

i have 2 dxf files that need to be milled to out and whenever i load them i get an error stating that it cannot be milled because the thickness is 0.00000, each part needs to be milled out of 3/4 inch wood, i have even made a Gcode file with all of the correct cut depths and peices set out but i cannot figure how to import the gcode directly into the machine, or can somebody help me convert my gcode back into a DXF file with the proper depths so the machine can interpret them?
(144.79 KiB) Downloaded 90 times

Daniel Odom
Senior Member
Posts: 204
Joined: Thu, Oct 20 2011, 12:52PM
Company Name: Carlton Kitchen and Bath

Re: 91000 DXF file has no depth

Postby Daniel Odom » Tue, Oct 02 2012, 8:08PM

You need to put the geometry on specifically named layers.... http://order.ecabinetsystems.com/update ... Manual.pdf . Look at page 67.

Return to “Thermwood 3-Axis Machinery”

Who is online

Users browsing this forum: No registered users and 3 guests