Machine seems to be out of level
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis
-
Scott Marshburn
- Guru Member
- Posts: 837
- Joined: Sat, Mar 05 2011, 7:29AM
- Company Name: Heritage WoodWorks
- Country: UNITED STATES
- Location: Jacksonville Nc
- Contact:
Machine seems to be out of level
Our machine seems to be out of level when we fly cut our waste board and flip it left to right the through cut scores are deeper on the 901 corner and almost 0 on the adjacent corner could someone outline the proper way to get It back to level. Thanks!
Yes! Oh Yes! I Think We Are Going to make It!
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467
-
Brad McIntosh
- Guru Member
- Posts: 559
- Joined: Wed, May 18 2005, 6:59PM
- Company Name: CNC Automation
- Country: CANADA
- Location: St. Zotique, Québec, Canada
- Contact:
Re: Machine seems to be out of level
Scott,
Resurface the top of your main SPOILBOARD first. This will "level" out the work envelope. Then resurface your WASTEBOARD. Since the SPOILBOARD is now "leveling" things, your newly resurfaced WASTEBOARD should be flippable, rotateable, etc due to it's new uniform thickness. (Humidity caused variations excluded.)
Hope this helps.
Resurface the top of your main SPOILBOARD first. This will "level" out the work envelope. Then resurface your WASTEBOARD. Since the SPOILBOARD is now "leveling" things, your newly resurfaced WASTEBOARD should be flippable, rotateable, etc due to it's new uniform thickness. (Humidity caused variations excluded.)
Hope this helps.
-
Georgi Baltov
- Guru Member
- Posts: 341
- Joined: Sat, Mar 10 2007, 7:31PM
- Company Name: Top Notch Cabinets
- Country: CANADA
- Location: Oakville, Ontario
- Contact:
Re: Machine seems to be out of level
I resurfaced our nemi tables about two weeks ago for the same reason
Top Notch Cabinets
http://www.topnotchcabinets.com/
http://www.topnotchcabinets.com/