from a different Way...

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Rich Kasten

MarcoKnjaschewitsch
Junior Member
Posts: 73
Joined: Fri, Jan 26 2007, 1:44AM
Contact:

from a different Way...

Postby MarcoKnjaschewitsch » Fri, Jan 18 2013, 3:28PM

Ok i figure i will change up this and start fresh and see if anyone can help or know how. Here are the 2 Logo's i need to get done. I need to do them on a 1 inch board within a 3ft Long x 2ft High Oval shape. Just need it to carve out the logo's...Seems like it should be easy...just i've never done it or fooled with a program to do it...
Attachments
kekuli logo1.jpg
hubers logo1.jpg

Scott Marshburn
Guru Member
Posts: 736
Joined: Sat, Mar 05 2011, 7:29AM
Company Name: Heritage WoodWorks
Country: UNITED STATES
Location: Jacksonville Nc
Contact:

Re: from a different Way...

Postby Scott Marshburn » Fri, Jan 18 2013, 7:01PM

Macro what you are wanting to do with these logos can easily be don with a carving program such as art cam or v carve pro . THM has a custom program service that could get this project done for you. Just contact them and I am sure they would be more than glad to help you out.
Yes! Oh Yes! I Think We Are Going to make It!
https://www.youtube.com/user/ecabinetstips

MarcoKnjaschewitsch
Junior Member
Posts: 73
Joined: Fri, Jan 26 2007, 1:44AM
Contact:

Re: from a different Way...

Postby MarcoKnjaschewitsch » Sat, Jan 19 2013, 1:41AM

i am going to have to really look into V-Carve pro i think I have used it with demo stuff and it seems pretty cool. Just didnt know if doing this on there was a possible thing.

User avatar
Josh Rayburn
eCabinets Beta Tester
Posts: 1260
Joined: Wed, Jul 01 2009, 2:19PM
Company Name: Halls Edge Inc
Country: UNITED STATES
Location: Stamford, CT USA
Contact:

Re: from a different Way...

Postby Josh Rayburn » Mon, Jan 21 2013, 8:04AM

Yep it's possible.
preview.jpg
Josh Rayburn
Hall's Edge, Inc.
CNC Machining Service


Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570

MarcoKnjaschewitsch
Junior Member
Posts: 73
Joined: Fri, Jan 26 2007, 1:44AM
Contact:

Re: from a different Way...

Postby MarcoKnjaschewitsch » Mon, Jan 21 2013, 5:22PM

hey So working on it how far i've got. Just need to figure out how to get my referencing to work off the G902 Fence and then back instead of where i am. But i just set it up like this and its a start!

Image

User avatar
Josh Rayburn
eCabinets Beta Tester
Posts: 1260
Joined: Wed, Jul 01 2009, 2:19PM
Company Name: Halls Edge Inc
Country: UNITED STATES
Location: Stamford, CT USA
Contact:

Re: from a different Way...

Postby Josh Rayburn » Tue, Jan 22 2013, 9:18AM

Marco,
Open your code file and change G901 (or G52L1) to G902 (or G52L2) if that's what you need. You can also do this at the controller by arrowing down to the line in question, press tab, edit the line, then enter. Don't forget to arrow back up the the red line you started from before pressing "green to go".
jnr
Josh Rayburn
Hall's Edge, Inc.
CNC Machining Service


Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570


Return to “Thermwood 3-Axis Machinery”

Who is online

Users browsing this forum: No registered users and 4 guests