Best Method Of Inverting Z axis

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Rich Kasten

casey marionneaux
New Member
Posts: 2
Joined: Tue, Sep 24 2013, 9:59AM
Company Name: TCM Lumber
Country: UNITED STATES

Best Method Of Inverting Z axis

Postby casey marionneaux » Wed, Aug 26 2015, 4:55PM

My design software post processor uses +Z for downward motion and my Thermwood machine uses -Z. Whats the best route to fix this?

Will Williamson
Guru Member
Posts: 397
Joined: Thu, Dec 08 2005, 6:10PM
Company Name: Williamson Finewoodwork
Country: UNITED STATES
Location: Capac MI
Contact:

Re: Best Method Of Inverting Z axis

Postby Will Williamson » Wed, Aug 26 2015, 7:29PM

Have you tried to just change the plus to a minus in the post processor? What software is this?
Will

http://www.willmade.com

KEG/Intel Core i 7 CPU K875 @ 2.93 GHZ/12G Ram
Dual boot XP PRO/Windows 7 Nvidia Quatro 600 1Gig Ram

User avatar
Brad McIntosh
Guru Member
Posts: 483
Joined: Wed, May 18 2005, 6:59PM
Company Name: CNC Automation
Location: St. Zotique, Québec, Canada
Contact:

Re: Best Method Of Inverting Z axis

Postby Brad McIntosh » Thu, Aug 27 2015, 7:27AM

Be careful to review the other axis as well... Thermwood's machines have used "right-hand rule" for decades. You will want to check and see if you software "rotates" the X and Y axis in order to stay relative to the +Z downward direction. (This would be "Inverted right-hand rule".)

The image below illustrates "right-hand rule". The fingers/thumb point in the POSITIVE directions. (Inverting the hand would result in the "inverted right-hand rule.)

Right-hand-rule.png


If the X & Y axis are correct and it is just the Z that your post "reverses", as Will suggested - just check and see if you can "negate" the Z output in the post.


Return to “Thermwood 3-Axis Machinery”

Who is online

Users browsing this forum: No registered users and 5 guests