Tenons & bit max. depth

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis

Post Reply
Jeremy Schiffer
eCabinets Beta Tester
Posts: 1119
Joined: Tue, May 10 2005, 9:36PM
Company Name: Corlane Custom Cabinetry LLC
Country: UNITED STATES
Location: Carnesville, GA
Contact:

Tenons & bit max. depth

Post by Jeremy Schiffer »

When cutting tenons of a certain thickness where the cutting depth is greater than the maximum depth specified for the tool, the result are the candy canes as per the attached photo.

When it returns to make the final depth pass, it does not do the candy cane.

Also, when moving from the end of the initial pass to the beginning of the next pass, it doesn't seem to be a G00 move.
IMG-20161214-00147.jpg
http://www.corlanecabinetry.com

Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Clint Buechlein
Thermwood Team
Posts: 696
Joined: Fri, May 15 2015, 1:21PM
Company Name: Thermwood Corp
Country: UNITED STATES

Re: Tenons & bit max. depth

Post by Clint Buechlein »

Jeremy,

Can you post an export of your settings please? Also if you have the code from these parts being created, as well as the non rapid issue so we can compare that would be great.

-Clint-
Post Reply