When cutting tenons of a certain thickness where the cutting depth is greater than the maximum depth specified for the tool, the result are the candy canes as per the attached photo.
When it returns to make the final depth pass, it does not do the candy cane.
Also, when moving from the end of the initial pass to the beginning of the next pass, it doesn't seem to be a G00 move.
Tenons & bit max. depth
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis
-
- eCabinets Beta Tester
- Posts: 1119
- Joined: Tue, May 10 2005, 9:36PM
- Company Name: Corlane Custom Cabinetry LLC
- Country: UNITED STATES
- Location: Carnesville, GA
- Contact:
Tenons & bit max. depth
http://www.corlanecabinetry.com
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
-
- Thermwood Team
- Posts: 702
- Joined: Fri, May 15 2015, 1:21PM
- Company Name: Thermwood Corp
- Country: UNITED STATES
Re: Tenons & bit max. depth
Jeremy,
Can you post an export of your settings please? Also if you have the code from these parts being created, as well as the non rapid issue so we can compare that would be great.
-Clint-
Can you post an export of your settings please? Also if you have the code from these parts being created, as well as the non rapid issue so we can compare that would be great.
-Clint-