CS40 4X8 goes into estop when homeing machine

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis

Steve Detina
Junior Member
Posts: 80
Joined: Wed, Jul 20 2005, 7:29AM
Company Name: Silhouette Custom Cabinets
Country: CANADA
Location: Hamilton, Ontario

CS40 4X8 goes into estop when homeing machine

Postby Steve Detina » Wed, Jun 14 2017, 11:48AM

Hello everyone,

We have a 4X8 CS 40. Recently we have been having issues with the machine going into error mode.

I have a few screen shots of the the error and the history but i cannot attach the .bmp file to this post.(gives me error invalid file)

A screen is displayed Siemens Feed Module

I have to then open the panel door and reset the Siemens Feed Module.

In the PLC history is states the following errors

Error 88
Siemens Feed Module Fault (input 63)
Error 62
Siemens Feed Module Fault (input 63)
Error 65
Siemens Feed Module Fault (input 63)
Error 9
Siemens Feed Module Fault (input 63)
Error 73
Siemens Feed Module Fault (input 63)
Error 73

This only started to happen recently.

Any Ideas?

Thanks in advance.

Return to “Thermwood 3-Axis Machinery”

Who is online

Users browsing this forum: No registered users and 3 guests