5'x5' tables

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis

Post Reply
Audrey Racine
eCabinets Beta Tester
Posts: 164
Joined: Tue, May 17 2005, 6:31AM
Location: Canada, Quebec city

5'x5' tables

Post by Audrey Racine »

Hi,

We do have a Thermwood 3-Axis C42-163.

This model has 2 5' x 5' tables.

Here is what we would like to do: Have 1 sheet 5'x5' on the left table and another 5'x5' sheet on the right table. The machine would start with the left table, once it's done it will cut the right. During the time the machine cuts the right, we would be able to unload the left table. We would continue like this for about 500 sheets.

The problem is, we do not know how to make this work...

Is there any possibility of doing this?

Thank you!
Brad McIntosh
Guru Member
Posts: 559
Joined: Wed, May 18 2005, 6:59PM
Company Name: CNC Automation
Country: CANADA
Location: St. Zotique, Québec, Canada
Contact:

Re: 5'x5' tables

Post by Brad McIntosh »

Audrey,

Contact Jim here at the CNC Automation offices. He just worked with another client to do the same thing. /
Contactez Jim ici au bureau de CNC Automation. Il a juste travaillé avec un autre client pour faire la même chose.

software@cncautomation.com
1-800-421-5955 ext. 540
Brad McIntosh
CNC Automation

Home: http://www.cncautomation.com
Twitter: @bmcncautomation
Audrey Racine
eCabinets Beta Tester
Posts: 164
Joined: Tue, May 17 2005, 6:31AM
Location: Canada, Quebec city

Re: 5'x5' tables

Post by Audrey Racine »

Yes it is us!

Thank you!
Brad McIntosh
Guru Member
Posts: 559
Joined: Wed, May 18 2005, 6:59PM
Company Name: CNC Automation
Country: CANADA
Location: St. Zotique, Québec, Canada
Contact:

Re: 5'x5' tables

Post by Brad McIntosh »

Great. I hope he did a good job! / Merveilleux. J’espère qu’il a fait un bon travail! :D
Brad McIntosh
CNC Automation

Home: http://www.cncautomation.com
Twitter: @bmcncautomation
Audrey Racine
eCabinets Beta Tester
Posts: 164
Joined: Tue, May 17 2005, 6:31AM
Location: Canada, Quebec city

Re: 5'x5' tables

Post by Audrey Racine »

Yes!!! It does work!!!! Youhhou!!!! :D
Post Reply