issue with intime kernel

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis

Post Reply
Thomas strembitsky
Guru Member
Posts: 293
Joined: Fri, Jul 27 2012, 12:30PM
Company Name: true form cabinets
Country: CANADA
Contact:

issue with intime kernel

Post by Thomas strembitsky »

hard a hard time getting the machine up and running keep getting this error message
any help would be appreciated it was error 20 not 25 though
intime error.PNG
Intel(R) Core(TM) i5-6400 @ 2.70GHz 8.00 GB RAM
NVIDIA GeForce GTX 950
Windows 10 Professional 64-bit
http://www.trueform.ca
CS43 cnc
Brad McIntosh
Guru Member
Posts: 559
Joined: Wed, May 18 2005, 6:59PM
Company Name: CNC Automation
Country: CANADA
Location: St. Zotique, Québec, Canada
Contact:

Re: issue with intime kernel

Post by Brad McIntosh »

Thomas,

On this lower level side relating to the INTime Kernel, I am not an expert but... I believe that as this application deals with creating low-level hooks between the THM application and the I/O of the machine components, I understand that it is important that it gets loaded EARLY in the startup process.

It may be that you have something else installed on your control that is loading first and is then interfering with INTime's "I/O hooking/linking" attempts.

Hopefully those more technically inclined in this area at Thermwood will have an answer shortly.
Brad McIntosh
CNC Automation

Home: http://www.cncautomation.com
Twitter: @bmcncautomation
Tommy Wieler
Senior Member
Posts: 124
Joined: Fri, Sep 22 2017, 7:49AM
Company Name: Silverpine Cabinets
Country: CANADA

Re: issue with intime kernel

Post by Tommy Wieler »

I've had issues with intime before as well.
I modified the startup process to delay THM startup by 30 seconds to give intime a chance to start before THM. Never had issues since.
Post Reply